AVR GCC&IAR
úÄÒÁ×ÔÓÔ×yÊÔÅ õ×ÁÖÁÅÍÙÅ!ðÒÏÂyÀ ÞÔÏÔÏ ÓÄÅÌÁÔØ × ó ÐÏÄ at90s2313.÷ÏÚÎÉË ÄyÒÎÏÊ ×ÏÐÒÏÓ -ðÏÒÔ D ËÒÏÍÅ PD4 ÒÁÂÏÔÁÅÔ ÎÁ ×ÈÏÄ. þÅÒÅÚ PD4, Ñ ÐÉÝy ÐÏ...
58 discussions on ElectronDepot about the Hitachi HD44780: what owners asked, what went wrong, and what fixed it.
úÄÒÁ×ÔÓÔ×yÊÔÅ õ×ÁÖÁÅÍÙÅ!ðÒÏÂyÀ ÞÔÏÔÏ ÓÄÅÌÁÔØ × ó ÐÏÄ at90s2313.÷ÏÚÎÉË ÄyÒÎÏÊ ×ÏÐÒÏÓ -ðÏÒÔ D ËÒÏÍÅ PD4 ÒÁÂÏÔÁÅÔ ÎÁ ×ÈÏÄ. þÅÒÅÚ PD4, Ñ ÐÉÝy ÐÏ...
Hello:What is the latest RTC code anyone could recommend for the PIC (16f)family?My requirements are simplicity and low power, with LCD display andperhaps RS232 interface.Is the Microchip AN582 as good as it gets?Thanks,TomC
Does anybody make a cheap single-board computer with microcontroller and LCD display, like an AVR Butterfly except that the LCD is easy to use? The Butterfly's LCD is segment-addressable and if you want digits or characters, you have to...
I am looking for WWVB receiver to add to an existing product.I found at Digikey: 561-1005-NDThis receiver module: C-MAX CME8000-BUS-LP-01Are there other modules like this but cheaper.I am looking for 50-100 units.Clocks with receivers in...
Does anyone have the assembler code for 4 line Optrex compatible LCD'salong with a string writing routine? Thanks in advance.Scott
Servus Elektronik-Freunde ^^ich möchte gern mit Schrittmotoren und Servos experimentieren,und diesen mit Taster oder Poties sagen was se tun sollen!Auch möcht ich mal ne Anzeige mit einbringen!Ob mit oder ohne Microkontroller!!So nun aber...