help in node finding

In Probe, View, Output File, search for "N00193"

I don't use Capture, but I would expect that you can View, Netlist from there also.

You can also prename nodes... double-click (in Schematics, you may need to experiment in Capture, gag-me-with-a-spoon :-) on a wire and Label it.

...Jim Thompson

Hi,

I found the net. I have used a transistor (Q1: 2N2222) in my schematic page and connected wire to it. But apparently capture does not recognize it or ignore it. It gives the error: WARNING [NET0093] No PSpiceTemplate for Q1, ignoring How it can be possible? I used it from the transistor library and connected wire to it correctly.

Surena.

CTRL F Nets N00193

It should light up

Regards,

Boris Mohar

Got Knock? - see: Viatrack Printed Circuit Designs (among other things)

void _-void-_ in the obvious place

Maybe the item in the library is incomplete, and one or more of its pins/nodes is un-numbered. I had a similar problem with completely different software, so it was worth mentioning.

"surena" schrieb im Newsbeitrag news: snipped-for-privacy@g14g2000cwa.googlegroups.com...

Hello Surena,

You have to take the components only from the libraries below the path "PSPICE". The parts from other libraries don't have the correct settings for simulation.

Best regards, Helmut