Field-Programmable Gate Arrays

15255 Threads Posts
to

Xilinx DCM and Timing Constraints

Hi folks, I have outputs being driven by a fast internal clock generated by a DCM. It would seem to me that I should be...
6 comments posted 22yrs
posted by bradsmallridge
6 comments posted 22yrs posted by bradsmallridge

Xilinx lead free parts hidden fact

Hi all, Xilinx claimed all their currents device are available in lead free packages, but that not true... at least tha...
2 comments posted 22yrs
posted by ccon67
2 comments posted 22yrs posted by ccon67

add/sub 2:1 mux and ena in a single LE (Cyclone)

I want to realize an add/subtract function, a 2:1 mux between this adder and a load value and an enable of the register...
11 comments posted 22yrs
posted by martin.schoeberl
11 comments posted 22yrs posted by martin.schoeberl

PLL lock usage into Altera Stratix devices

Dear all, I'm currently using a Fast Pll clock output as main clock of my design inside an Altera Stratix device. I hav...
3 comments posted 22yrs
posted by giachella.g
3 comments posted 22yrs posted by giachella.g

modelsim crashs with large ram simulation model

I 'd like to simulate my design with a memory simulation model. The vhdl for memory model is like this: ---------------...
3 comments posted 22yrs
posted by htj
3 comments posted 22yrs posted by htj

Synplify on Fedora C2

I'm trying to run Synplify on a Fedora Core 2 platform but I get the following error message: "relocation error: /../sy...
4 comments posted 22yrs
posted by david
4 comments posted 22yrs posted by david

XILINX SHIPS ONE MILLION SPARTAN-3 FPGAS

I was just thinking about: 1M/250k = 4 customers, ok? Why Xilinx, Altera, etc, give us prices for 250k pcs??? DSPs vend...
7 comments posted 22yrs
posted by oen_no_spam
7 comments posted 22yrs posted by oen_no_spam

Unused pins

Hi, I have several signals in my design which are outputs that is they are connected to output pin symbols in my schema...
1 comments posted 22yrs
posted by ALuPin
1 comments posted 22yrs posted by ALuPin

spartan 3 starter kit

hi i have a question: i have the sparten 3 starter kit from digilent. i use the ise web pack from xilinx and i would li...
1 comments posted 22yrs
posted by u.stadler
1 comments posted 22yrs posted by u.stadler

JBits and Spartan

Hello, Does somebody know if the last version of JBits (3.0) will work with spartans family? I know JBits 3.0 supports...
5 comments posted 22yrs
posted by rha_x
5 comments posted 22yrs posted by rha_x

Advice for a Beginner?

I'm looking for advice and resources to help me learn about hardware design and FPGAs. So far I've done tons of googlin...
5 comments posted 22yrs
posted by filtered
5 comments posted 22yrs posted by filtered

Xilinx ISE 6.3i 'include construct issue

Hello, A Verilog project I'm working on uses 'include statement in some of its modules (.v files) to reference some pre...
0 comments posted 22yrs
posted by njoroge
0 comments posted 22yrs posted by njoroge

FPGA not turning off

Hi, I've connected my FPGA (Xilinx Spartan 2E) to the PCI bus of my PC. The FPGA is powered from a seperate power suppl...
2 comments posted 22yrs
posted by mike
2 comments posted 22yrs posted by mike

64 bit version of xilinx ISE

does any one know if there is a 64 bit windows or linux version of xilinx ISE available? thanks Geoffrey Wall Masters S...
6 comments posted 22yrs
posted by wallge
6 comments posted 22yrs posted by wallge