auf einer Platine, die ich irgendwo gefunden habe, ist dieses Ding mit
2X7 Beinen verbaut.
Mein Problem: Im Internet finde ich nichts über dieses Bauteil und um den Vorgang auf der Platine nachzuvollziehen muss ich unbedingt wissen, wofür dieses Bauteil ist und was es macht.
Am Wed, 01 Dec 2004 13:06:11 +0100 hat Michael Post geschrieben:
Auch diese Suche findet ein paar Links, im (ca.) 55. steht auch drin (direkt im Google Ergebnis) daß es ein 4fach EXOR ist. Aber bei den 74ern sind die Buchstaben davor eine Herstellerangabe (SN ist glaub ich TI). Etwas Erfahrung hilft da natürlich.
All manufacturers of TTL chips use a common naming system, as exemplified by the chip name ``SN74LS00''. The prefix SN indicates that the chip was made by Texas Instruments; other manufacturers have their own prefix codes, but if the remainder of the chip name matches, the chips should perform exactly the same function. Additional one letter codes may be added as prefixes or suffixes to this code, for example, RSN indicates radiation hardened chips made by Texas Instruments, and SNM indicates the use of quality control procedures specified by the military specification MIL-STD-883. The numeric code 74 indicates that the chip conforms to the requirements of the civilian computer industry, being able to operate over a temperature range of to C, while the code 54 indicates the ability to operate over the more extreme temperature range of to C required by many military and industrial applications. The letters LS indicate which subfamily the chip belongs to. Finally, the last two digits indicate the logical function performed by the chip.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.