The TV had been making an arc sound for quite some time when the set was cold, however everything still worked fine. Which leads me to believe that the HV splitter was having some issues? However now while doing some test I fine that I don't even have power going to the HV transformer. The only place I can seem to fine any juice in the system is on main board to the right of the set (if looking in from the rear). If anyone could make any suggestions I would appreciate it. It is a classic case of worked one day and not the next
RCA 46" TV P46725SK won't turn on
Jul 04, 2005
22 Replies
Ok its a CTC169... You will have to rebuild the SMPS section ...First 2.2mfd 22mfd 39mf Then whilst in standby mode check voltages....+15Von cr4118 Then ...134V on HOT collector If OK fine.. If not rebuild Horizontal Out section HOT/Blue Box caps etc.. Whilst in there replace HV Block..
kip "fosjef67" wrote in message news:Kkd%e.23042$ snipped-for-privacy@fe04.news.easynews.com...
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required