60 discussions on ElectronDepot about the Microchip ICD2: what owners asked, what went wrong, and what fixed it.
Hallo, mein neuestes Windows ist derzeit ein 32Bit-xp auf einem rechner mit Was jetzt? - Nerven bewahren und die Entwicklung ignorieren - Auf win 7 umsteigen (wegen der vielen kleinen tollen - mit neuen Rechner auf opensuse gehen und das...
Hello,I currently have an ICD2 from Microchip. I use it to develop PIC16 codeusing the MPLAB debugger and assembler. I need to move to the PIC18 partsand C language, but I am struggling figure out the development tools to get.Do you have...
Aren't there 2 race conditions?If the flipflop output drove the counter reset that would fix one.(Possible runt clock pulse.)If the flipflop set and clear were used instead of the clock input thatwould fix the other. (Clock rises right...
Hello,I am thinking of buiying this graphic display. has a 4 analog I/O for the touch screen, and 18 I/O (the specidications are on the link "Data Sheet")I have a VERY hard time trying to figure the best microcontroller to interface it with...
I want to use a switch to step through a ten LED string one LED at atime. I also need to bypass a LED (take it out of the sequence) when Iwant. I'm ginna be using a foot swtich if this matters. Any advicewill be greatly appreciated.
Hi,I am thinking about buying or building a PIC programmer and wouldappreciate some advice in choosing one. I've never laid hands on oneso am I not sure what to look for.I am a hobbyist and would like to program the occasional IC just...