24 discussions on ElectronDepot about the Atmel AT90S2313: what owners asked, what went wrong, and what fixed it.
Witam.Pytanie może głupie, ale mam doświadczenie jakieś tam tylko z Asm dla '51 i troszkę Bascoma.Potrzebuję wykonać układ robiący bardzo skomplikowaną czynność ;)Ma sprawdzać stany dwóch wejść. Jeżeli na pierwszym wejściu...
The other week I was downloading the ATmega128 datasheet to checksomething and I noticed the mega640/1280/1281/2560/2561.Any idea when these are going to be available? Digi-Key shows the 2560and 2561 but zero stock; the others don't show up...
Hi all,What happens if during saving the parameter in byte of EEPROM( it takesabout 5-10 msec)the Power Down occurs.What should be in the byteprogrammed ? The same value/ The next value/ Undetermined?I developed the diesel controller card...
I will try to make this question as short as possible. I'm making a"quiz box" that displays the first two of any 20 players that buzz in.I'm using a pic16f77. The program scans 20 ports (buttons) anddisplays the first two numbers (1-20)...
Hallo,ich vergesse immer meine Pizza im Ofen und hätte gerne einengroßen Countdown-Timer, den ich mir über den PC setzen kann.Was meint Ihr: Lieber "alte" Bauweise (also mit Quarz und Logik)oder mit einem Mikrokontroller?Falls mit...
Twenty years ago I built a gadget based on a Zilog Z8 8-bit processor and a2716 Eprom. I want to re-do the entire design using a more modern chip --preferably in the PIC family (a DIP device that so I can wire up the boardon the kitchen...