Hello,
I have a large design implemented in Verilog. In the design there are several thousand SRL16 type shift registers that are inferred from the Verilog by XST. What is the best way to initialize each shift register with different a unique value? Preferably this initialization could be specified outside of the verilog so that thousands or different module definitions are not needed. I also am using all 96 block rams on the XC3S4000 and need to initialize those as well.
Currently I am initializing the block rams in the module where they are instantiated but for the final design I need this to be seperated from the Verilog module definition because I don't want to have 96 different module definitions.
Thanks, Matt Hardy