Aufbau eines Quarz-Oszilators / Schwingquarzes

Hallo NG. Ich habe mich mal wieder dran erinnert, dass ich wissen wollte wie ein Quarz-Oszilator / Schwingquarz innerlich aufgebaut ist, wie das ding also funzt. Leider waren meine Suchen nicht sonderlich erfolgreich.

Nach was sollte ich denn vielleicht suchen bzw. wer kennt eine "Bauteile"-Seite.

Hier erklären geht nat. auch.

Danke

Reply to
Robert K.
Loading thread data ...

Robert K. schrieb im Beitrag ...

formatting link
(Das grosse Quarzkochbuch) ?

--
Manfred Winterhoff, reply-to invalid, use mawin at despammed.com
homepage: http://www.geocities.com/mwinterhoff/
de.sci.electronics FAQ: http://dse-faq.elektronik-kompendium.de/
Read 'Art of Electronics' Horowitz/Hill before you ask.
Lese 'Hohe Schule der Elektronik 1+2' bevor du fragst.
Reply to
MaWin

Robert K. schrieb: > Quarz-Oszilator / Schwingquarz ... wer kennt eine "Bauteile"-Seite.

Hier:

formatting link
Gruss, Joachim Riehn

--
Spamschutz! Email-Adresse(J.Riehn):      jriehn  *at*  gmx.de
Reply to
Joachim Riehn

See for quarts crystals 'Technical info' on

formatting link

In short, it is a thin piece of quarts, with on both sides silver (or gold) electrodes, mounted in two springs, which are connected to the leads. Then a cap is connected (welded or soldered) on top in a nitrogen environment. So only nitrogen is inside package and the silver will not become silveroxide. This will change specs.

And a Quarts-oscillator is a oscillator cicuit with a quarts-crystal together in one package.

Erik

Reply to
Erik

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.