I have a P1100 monitor which was working great yesterday. Now it has no picture and the LED is flashing fast yellow. When you power on it goes green then flashing yellow and the menu will not come on.
Any suggestions would be appreciated.
Robert
That could mean a lot of things, probably a fault in the power supply or the horizontal scan circuitry. A good start would be to test the HOT to see if it's shorted, I'd also check all the rectifier diodes in the output side of the power supply. If any of those are bad there's a good chance of one or more dried up capacitors or cracked solder joints.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.