22 discussions on ElectronDepot about the Xilinx XPLA3: what owners asked, what went wrong, and what fixed it.
I looked at XAPP0058 which describes some algorithms for in systemprogramming of some Xilinx CPLDs. It appears that there are enough data to program a XPLA3 device onceI have the binary data I want to program without needing any...
I was posting to the thread on the embedded clock in a Manchesterencoded bit stream and realized that the clock is not truely embeddedin the data stream. I say this because you still have to know theclock rate in order for it to work. The...
We are building a new radio telescope called PAST( we will install at the South Pole or in Western China.To make this work, will need to sample (6 to 8 bit precision) dozensof analog voltages at 400 Msample/sec and feed these data streams...
Is the coolrunner XPLA3 getting axed? I noticed that it is no longer a link on the xilinx font page. The online store does not list them on the front page(only Cool runner II and the XC9500 Series). Its also slim pickens' when you do...
Witamipytamczy ktos jest w posiadaniu (sprawdzonego) schematu programatora do tegowrednegu ukladu (ATMega8)? Jesli tak moze bedzie tak mily i sie podzieli?A moze ktos wie gdzie ewnetualnie gotowy takowy programator mozna nabyc zamniejsze...
I know this is an FPGA news group, and my question is about CPLDs, but theredid not seem to be a CPLD news group! So here goes...I am comparing these two families. Going to pick one of the two for a bunchof new designs. After comparing...