Embedded Linux

DMA Drivers?

Hi all, I am going to attempt to write a driver to access the SSP port in the EP9301 processor. If anyone has example c...

1 comments posted 21yrs

posted by bradp

1 comments posted 21yrs posted by bradp

DMA

Hello, I am trying to figure out how to make a program from user land that can use the DMA controller. I would like it...

4 comments posted 21yrs

posted by bradp

4 comments posted 21yrs posted by bradp

Generate an EXT2 image without being root

Hi all, I'd like to be able to generate an ext2 filesystem image for a ramdisk. I can do that at the moment by mounting...

4 comments posted 21yrs

posted by thegreatsuprendo

4 comments posted 21yrs posted by thegreatsuprendo

LEON2 or microblaze on uclinux

hi all, i have buy a development board spartan-3 fga based. http://www.silica.com/en/products/evaluationkits/SP3%20Deve...

0 comments posted 21yrs

posted by opb

0 comments posted 21yrs posted by opb

AWLP turns your PC into web-managed wireless access gateway

Greetings. I would like to inform you about an open-source project I developed in Perl, using Slackware distro, HostAP...

0 comments posted 21yrs

posted by acakircali

0 comments posted 21yrs posted by acakircali

any Linux supported USB video capture card?

I'm looking for a reasonably priced USB (1 or 2) video capturing device working under Linux. The USB requirement is due...

3 comments posted 21yrs

posted by sr

3 comments posted 21yrs posted by sr

embedded linux with profibus?

Hi, I'm just strating a very new private project to buid a simple flight control system using (cheap) standard industry...

0 comments posted 21yrs

posted by hager_stefan

0 comments posted 21yrs posted by hager_stefan

Throughput question with CF/DiskOnChip

Hello all, I have a small system with an Intel StrongArm processor running a 2.4.11 kernel. This board contains both a...

9 comments posted 21yrs

posted by john

9 comments posted 21yrs posted by john

custom u-boot bootloader porting

If you are looking for a good bootlaoder for your new hardware... then I am able to help you out with porting u-boot to...

1 comments posted 21yrs

posted by me

1 comments posted 21yrs posted by me

how to start the module of embedded linux

I am working in a company as corporate trainer, and now we hve to start the module of Embedded linux, can any 1 suggest...

0 comments posted 21yrs

posted by thesushant

0 comments posted 21yrs posted by thesushant

Linux for embedded mpc5xx

I'm trying to build a cross compiler for mpc5xx boards. My distribution is SuSe 9.2. I've been following Graig Hollabau...

4 comments posted 21yrs

posted by lyttlec

4 comments posted 21yrs posted by lyttlec

Something wrong with setlocale(LC_ALL, "") in glibc ?

When cross-compiling a Montavista Linux kernel for PPC, I modified the BSP and here comes the headache. Something wrong...

0 comments posted 21yrs

posted by jpyang

0 comments posted 21yrs posted by jpyang

Boot Method??

Hi, There are 2 disks(disk1, disk2), 2 processors(both p4) on my board. The communication between the two processors is...

0 comments posted 21yrs

posted by udaymullangi

0 comments posted 21yrs posted by udaymullangi

Linux in embedded MIPS32 systems

Hello, I have just bought ADSL modem/router inside I found prepared Linux. Could someone tell me how to debug (remotely...

4 comments posted 21yrs

posted by fibre_optic

4 comments posted 21yrs posted by fibre_optic

cross ldconfig from intel host to ppc target

Hello all, I'm working on a PPC (Pallas) based STB with network boot and all the rootdisk filesystem in RAM. I build th...

2 comments posted 21yrs

posted by gipunto

2 comments posted 21yrs posted by gipunto