Field-Programmable Gate Arrays

15255 Threads Posts
to

Synchronization between CPU-clock and FPGA clock.

Hi, I want to know how to properly interface between the CPU clock and the FPGA clock. My board has separate clocks for...
4 comments posted 22yrs
posted by kelvin8157
4 comments posted 22yrs posted by kelvin8157

post-synth. with webpack

Hi all, Is the webpack able to write a RTL post-synthesis VHDL file? If yes, how to do? Thanks Laurent www.amontec.com
0 comments posted 22yrs
posted by laurent.gauch
0 comments posted 22yrs posted by laurent.gauch

Hold violation and PLL

Hi, I have a problem on quartus II 3.0 software. I am using enhanced PLL and a set of input registers with FAST INPUT R...
2 comments posted 22yrs
posted by shardendu
2 comments posted 22yrs posted by shardendu

Partial Reconfiguration:Par fails during Assemble

Hello, I get the following error when I run Par during the assemble stage of the Partial Reconfiguration Flow. The comm...
0 comments posted 22yrs
posted by deepaka
0 comments posted 22yrs posted by deepaka

Command line in Windows?

What do you folks use as a command line shell in Windows? I know several people are working outside of Project Navigato...
13 comments posted 22yrs
posted by jakespambox
13 comments posted 22yrs posted by jakespambox

DPRAM - DIN, DOUT

Hello, I still try to configure a Dual Port RAM (Xilinx Spartan-IIE) I use the CoreGenerator of ISE. I wonder, why ther...
2 comments posted 22yrs
posted by Tobias.Moeglich
2 comments posted 22yrs posted by Tobias.Moeglich

Spartan IIE daisy chain problems

Hello! I'm trying to configure two Spartan IIE (XC2S300E) in a daisy chain using two PROMs (XC18V02) but I cannot seem...
1 comments posted 22yrs
posted by jerkerNO
1 comments posted 22yrs posted by jerkerNO

1.2V Voltage Regulators for Spartan III

Hi, Can anyone recommend any 1.2V voltage regulators (for use with a Spartan III). Input voltage is likely to be 3.3V. W...
0 comments posted 22yrs
posted by jon
0 comments posted 22yrs posted by jon

Xilinx Virtex-II: DCM int & ext feedback

Hi, I've tried to understand exactly which clocks a DCM will phase align when I do external or internal feedback by the...
4 comments posted 22yrs
posted by gernot.koch
4 comments posted 22yrs posted by gernot.koch

Problem using JBits 2.8 with (esl) RC1000-PP

*** french version below *** Hello all, When I use the loadfpga function to load a .bit (for example a null bitstream g...
0 comments posted 22yrs
posted by bartoche
0 comments posted 22yrs posted by bartoche

OFFSET OUT with phase shift in DCM

Hi I have a design in which ADC data is clocked into a Virtex II using a clock provided by the ADC chip. The ADC data l...
0 comments posted 22yrs
posted by damn_spam2001
0 comments posted 22yrs posted by damn_spam2001

Triscend Fastchip software under Windows XP?

Hi there, Has anyone managed to get Triscend's FastChip software working with visionClick 7.6 under Windows XP? I've us...
0 comments posted 22yrs
posted by michael
0 comments posted 22yrs posted by michael