Electronics Equipment

Need help IDing this power board

I have an old 80s 2x40 VFD unit that has a TDK power supply. it looks like a pull from some equipment, but i have no id...

0 comments posted 20yrs

posted by nospam

0 comments posted 20yrs posted by nospam

Advance J1B audio generator

Hello Everyone, I have picked up an Advance J1B audio generator at a garage sale that someone has attempted to repair p...

1 comments posted 20yrs

posted by peter.orban

1 comments posted 20yrs posted by peter.orban

VB6: Agilent 34970A with Module 34901A, Why measuring so slow?

Hello, I'm using the Agilent 34970A with module 34901A using the hardware Alarm signals from the external 'RS232' conne...

0 comments posted 20yrs

posted by h.van.winkoop

0 comments posted 20yrs posted by h.van.winkoop

BOONTON 8210 MODULATION METER

I am looking for the service manual with the schematics : the instrument is stuck in calibration. Thanks.

3 comments posted 20yrs

posted by 113101.2243

3 comments posted 20yrs posted by 113101.2243

Looking for HP8711A schematic diagrams.

Hi there, I'm a radio ham and I bought an HP8711A on e-bay for few dollars. I already fixed it, and now it works great....

4 comments posted 20yrs

posted by mporzio

4 comments posted 20yrs posted by mporzio

Agilent LogicWave OS Compatibility

I have an Agilent LogicWave PC hosted logic analyzer. The device and its software are very nice and useful. However I h...

12 comments posted 20yrs

posted by mkaras

12 comments posted 20yrs posted by mkaras

TEK curve tracer 370A files-correction

I'm reposting this because of incorrect model #. It's a TEK 370A (not 570A) - Sorry for confusion. Thanks Keyser Soze (...

4 comments posted 20yrs

posted by reglarnavy

4 comments posted 20yrs posted by reglarnavy

FA: HP 8447A BROADBAND AMPLIFIERS

I placed TWO of these on e-Bay, one is the Single Amp, the other is Option 0001, Dual Amplifier. Links follows:...

0 comments posted 20yrs

posted by w1ksz

0 comments posted 20yrs posted by w1ksz

converting Tek 570A curves

I have a Tek 570A curve tracer which uses some unknown format to save curves (curve##.c##) and setups (setup##.s##) to...

2 comments posted 20yrs

posted by reglarnavy

2 comments posted 20yrs posted by reglarnavy

Re: UK 40 way Edge Connector 2.54mm - Picture Attached

> *Subject:* UK 40 way Edge Connector 2.54mm - Picture Attached > *From:* "Aly" > *Date:* Fri, 29 Sep 2006 13:06:08 +01...

4 comments posted 20yrs

posted by j80k-vpfc

4 comments posted 20yrs posted by j80k-vpfc

Looking for OEM narrow-band FM receiver modules [136-174MHz]

Hi, Does anyone in this NG know of a manufacturer, preferably in the UK, that produces small(ish) narrow-band [25-50KHz...

0 comments posted 20yrs

posted by dave

0 comments posted 20yrs posted by dave

Repair of HP 8753A with ROM 1L Fail fault

I have just repaired an HP 8753A vector network analyzer which was reporting ROM 1L Fail at power up. As more equipment...

1 comments posted 20yrs

posted by jrwalliker

1 comments posted 20yrs posted by jrwalliker

wSHDCOM - Version 0.6

Hi.. I suppose this piece of software will be interesting to the most readers of this group. ==========================...

0 comments posted 20yrs

posted by adnisREMOVETHIS

0 comments posted 20yrs posted by adnisREMOVETHIS

Philips PM3350 serial port

Does anybody happen to know what kind of serial cable is required to connect the RS-232C (25-pin) serial port on a Phil...

2 comments posted 20yrs

posted by tim.auton

2 comments posted 20yrs posted by tim.auton

HP 8711A vector analyser boot problem

Hi, I have an 8711A which 1/2 works. It passes boot self test, puts up the "initializing" message, progresses onto the...

7 comments posted 20yrs

posted by gcd.deletemelbnospam

7 comments posted 20yrs posted by gcd.deletemelbnospam