ich liebe meinen HP48, kann damit aber leider Berechnungen nicht komfortabel dokumentieren/kommentieren (nur auf Papier oder per Abtippen in ein Textdokument).
Emu48 hilft schon etwas weiter ("Copy Screen", "Copy Stack"), allerdings muss man die Maus schuppsen um z.B. "30E-6" eingeben zu können.
Kennt jemand eine open source/freeware - Software für Windoze für relativ einfache technische Berechnungen mit UPN?
Ich nehme für alles Mögliche den XEmacs, da ist ein Paket "calc" dabei (M-x calc). Bei RPN-Rechnungen führt der ein Protokoll mit.
Das Attribut "einfach" trifft's allerdings nicht. Das Manual ist ein halbes Megabyte - komprimiert. Dafür kann der mehr Firlefanz als man je brauchen wird. For example, suppose the formula `2*a[1] + atan(a[2])' occurs in a C program; elsewhere in the program you need the derivatives of this formula with respect to `a[1]' and `a[2]'. First, type `d C' to switch to C notation. Now use `C-u M-# g' to grab the formula into the Calculator, `a d a[1] RET' to differentiate with respect to the first variable, and `M-# y' to yank the formula for the derivative back into your C program. Press `U' to undo the differentiation and repeat with `a d a[2] RET' for the other derivative.
As another example, suppose you are maintaining a C program and a TeX document, each of which needs a copy of the same formula. You can grab the formula from the program in C mode, switch to TeX mode, and yank the formula into the document in TeX math-mode format.
WRPN (HC16C-Emu), XCALC, Excalibur in eine Suchmaschine eingegeben dürfte Dich mit wenigen weiteren Schritten zu den restlichen RPN-Rechnern führen. Da geb es IIRC auch open source.
--
PS: Ein Realname wäre nett. Ich selbst nutze nur keinen, weil mich die
meisten hier bereits mit Namen kennen.
Markus "Makus" Gronotte in de.sci.electronics
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.