I have two out of town calls on these, same model # & same problem. Model # 55FX20B, both were shutting down, turn back on, & they would run fine, now they are both dead. Any common problems with this model? Do the STK convergence IC's cause this? Thanks, Dani.
Hitachi 55" rear projection.
May 18, 2007
2 Replies
Yes.
#1 Offishul Ruiner of Usenet, March 2007
#1 Usenet Asshole, March 2007
#1 Bartlo Pset, March 13-24 2007
#10 Most hated Usenetizen of all time
#8 AUK Hate Machine Cog
Pierre Salinger Memorial Hook, Line & Sinker, June 2004
COOSN-266-06-25794
Hia Dani, The STK's can cause the set to trip. Unplug the convergence coils one at a time, and see if it comes on. These are easily identified as 3 small plugs going to each gun form the convergence board, and will be somewhere near the STK IC's. I don't recall this set in detail, but I have worked an a lot of Toshiba, Sony's etc. If you need any more help, contact me.
Hope this helps
Rod
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required