Hardware Recomendation (cheap)

Dec 01, 2004 6 Replies

Hi all,



Looking for some hardware recomendations.



This will be for a small industrial device that collects data (from serial ports) and transmits to internet site. Low-cost is a must since we will potentially be deploying up to



1000 of these devices in the field to monitor our equipment.

The specs:


  • CPU - doesn't really matter speed 50Mhz is plenty (i386 preferred, not mand)
  • Memory - 32MB
  • Support for CF/DOC (Compact Flash / Disk-On-Chip)
  • Minimum 3 serial ports supported
  • at least 1 x 10Mbit Ethernet port
  • must support linux
  • 0 each (single quantity)
  • - (for 1000 qty)

Thanks all, Barry


The company I used to work for makes such a box, but it's overkill (8 serial, two Ethernet), and a lot more that $100. Just in case you're interested:

formatting link

Grant Edwards grante Yow! This PORCUPINE knows at his ZIPCODE... And he has visi.com "VISA"!!

I have yet to see a decent linux SBC that meets this price.

This may be feasable as prices will drop faster than 50% between single and 1000. If you had asked a year ago, SSV, Hannover, might have been a an option. But now that the $ has plunged ...

------

You can look at uclinux (linux for microprocessors without mmu) the hardware is very cheap

I have seen some interesting concepts prices. Try googling on "pc104 linux BSP"

I have seen some kai-mart>

They cost 50% more, but they are tried and true with linux support. You might check out Soekris at

formatting link

I believe the cheapest board, the net-4501 is about $150.

formatting link
might do the job buit needs some extra connectors.

Best Regards Ulf at atmel dot com These comments are intended to be my own opinion and they may, or may not be shared by my employer, Atmel Sweden.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required