Field-Programmable Gate Arrays

15255 Threads Posts
to

Virtex II : 3V3 to 1,8V IOB VCC

Hello! Is it safe to configure a FPGA with 1.8 VCCIO standard set (i.e. LVCMOS18) and supply the VCCIO pads by 3V3? I a...
1 comments posted 21yrs
posted by kszczepa
1 comments posted 21yrs posted by kszczepa

quartus and pll

I am using an altera cyclone, and want to use the internall pll to divide by 10 a clock. The megawizard plug in manager...
4 comments posted 21yrs
posted by a
4 comments posted 21yrs posted by a

JTAG recognise xcv50e instead of xc2s50e

I use a Spartan2E xc2s50e, but when I configure it using Parallel Cable IV JTAG, it is recognised as a VirtexE xcv50e!!...
3 comments posted 21yrs
posted by cialdi_NO_SP
3 comments posted 21yrs posted by cialdi_NO_SP

Connecting a spartan2 FPGA to an ISA bus

Hello Do anyone have some examples of connecting a FPGA to the isa bus? I'm looking for how to connect to the interrupt...
4 comments posted 21yrs
posted by rune.christensen
4 comments posted 21yrs posted by rune.christensen

xess boards

Hi, I'm thinking to purchase xess fpga board (XSA and XST-2). I don't know I should buy which one. All XSA boards have a...
2 comments posted 21yrs
posted by usrdr
2 comments posted 21yrs posted by usrdr

doubt on configuring SPARTAN2E FPGA

hi, I was working on configuring an Spartan2E FPGA. I used Xilinx 6.2 for developing my VHDL module. I was using the JT...
1 comments posted 21yrs
posted by viswan_1981
1 comments posted 21yrs posted by viswan_1981

Xilinx 6.2 to 6.3 upgrade brakes soc

Just upgraded ISE and EDK to 6.3 from 6.2. We use a small SoC consisting of a microblaze, SDRAM/DDRAM controllers and R...
6 comments posted 21yrs
posted by russelmann
6 comments posted 21yrs posted by russelmann

internal tristates and busses

Hello all, I'm curious to hear some comments on the following idea. I had a bus interface (total of 9, 16 bit wide regi...
7 comments posted 21yrs
posted by jberringer.at
7 comments posted 21yrs posted by jberringer.at

how to speed up my accumulator ??

Hello all, I've a design that contains a NCO (Numerically controlled oscillator). The NCO consists of a 32'bit accumula...
47 comments posted 21yrs
posted by moti
47 comments posted 21yrs posted by moti

HWICAP

Hello, Xilinx has provided with HWICAP module which allows one to read and write configuration frames within the same F...
2 comments posted 21yrs
posted by harish.vutukuru
2 comments posted 21yrs posted by harish.vutukuru

Experiences with Memec V2Pro Board

Hey, I was considering purchasing a DS-KIT-2VP20FF1152-SF eval board from Memec. http://www.insight.na.memec.com/Memec/...
4 comments posted 21yrs
posted by newman5382
4 comments posted 21yrs posted by newman5382

JTAG software from OpenWINCE project

Hello from Gregg C Levine Is anyone using the JTAG software originally from the OpenWINCE project? http://openwince.sou...
0 comments posted 21yrs
posted by landocalrssian__NOTME__
0 comments posted 21yrs posted by landocalrssian__NOTME__

Re: PLCC84

Sorry about that, I missclicked... My question is this: is there ANY Xilinx FPGA that comes in a PLCC84 or PC84 package...
4 comments posted 21yrs
posted by vadimv
4 comments posted 21yrs posted by vadimv

Using Spartan XL w/ modern ISE

Hi all, I am wondering if there is any way to use my legacy Spartan XL devices with ISE/WebPack as the front end. Is th...
1 comments posted 21yrs
posted by vadimv
1 comments posted 21yrs posted by vadimv

Dev board to experiment with pci interface?

Hi everybody. I want to start experimenting with fpga hardware. I have experience with simulating RISC processors in mo...
1 comments posted 21yrs
posted by kiran
1 comments posted 21yrs posted by kiran