Field-Programmable Gate Arrays

15255 Threads Posts
to

DMA-capable opb ipif

Hello, i'm trying to implement a obp-ipif with a master attachement to the bus. I managed to to implement an ipif based...
0 comments posted 21yrs
posted by mai99drh
0 comments posted 21yrs posted by mai99drh

Altera Quartus II 4.2 broke our simulation!

We are using a Stratix device and have an extensive verilog test bench. When we use the behavioral models altera_mf.v a...
1 comments posted 21yrs
posted by nate
1 comments posted 21yrs posted by nate

XILINX slice structure detaild description

Hi I would like to know if any of you knows a good paper (app note etc.) that describes the xilinx slice sturcture in d...
1 comments posted 21yrs
posted by ME_2003
1 comments posted 21yrs posted by ME_2003

Is it me or quartus ?

Hello, I have the following code : width = 128 architecture bhv of yy is function Stop_Sense ( IsSigCell, StopNextCells...
1 comments posted 21yrs
posted by fred._canxxxel_this_bartoli
1 comments posted 21yrs posted by fred._canxxxel_this_bartoli

Virtex2 I/O standards

For Virtex II parts, I see that the Vih and Vil levels are the same for LVTTL and LVCMOS33, my question is are the inpu...
3 comments posted 21yrs
posted by geeja.ats.at
3 comments posted 21yrs posted by geeja.ats.at

algorithm: square operation

There is a lot of square operations in my FPGA projects (using Xilinx VitexE). Now, I complete them by multiple, but th...
6 comments posted 21yrs
posted by fwj
6 comments posted 21yrs posted by fwj

Xilinx speed grading

I'm trying to determine the delay curve of a particular path in a Virtex2Pro -5 from min timing to max, including all p...
13 comments posted 21yrs
posted by usemyfirstname.usemylastname
13 comments posted 21yrs posted by usemyfirstname.usemylastname

altera cyclone and fifo synchronisation

I'm using quartus 4.2, and create some fifo with the mega wizard. on one side, synchronous data are writen at 27 MHz (f...
5 comments posted 21yrs
posted by a
5 comments posted 21yrs posted by a

Pal programming

Please help me with an information about PAL16V8 programming. What program should I use for obtain .jedec file? Thanks,
3 comments posted 21yrs
posted by dan.costin
3 comments posted 21yrs posted by dan.costin

Linking FPGAs with RocketIOs

Hi *, I'd like to establish a high-speed connection between two Virtex-II-Pro-FPGAs, using several bidirectional 3,125G...
7 comments posted 21yrs
posted by smd
7 comments posted 21yrs posted by smd

Newbie question: fitting in cpld

Hi, I have a quit simple question abaut cpld fitting: I'm using a Xilix Coolrunner (XPLA3) CPLD with pin locking and tr...
3 comments posted 21yrs
posted by s.mueller96
3 comments posted 21yrs posted by s.mueller96

Need help with CUPL

I have tried reading up on CUPL for a CPLD project, but I have been less than successful. Is there a good tutorial on s...
8 comments posted 21yrs
posted by brain
8 comments posted 21yrs posted by brain

ISE/XPS ERRORS

My design is mixed, Microblaze in VHDL and the application in verilog with CORE memory FIFOs and Dual Ports. I used COR...
1 comments posted 21yrs
posted by nospam
1 comments posted 21yrs posted by nospam

Cyclone device misteriously overheats

Hello, This problem has been getting on my nerves for quite some time now. First of all I'll let you know that I'm an i...
17 comments posted 21yrs
posted by alex.somesan
17 comments posted 21yrs posted by alex.somesan