1. Home
  2. Field-Programmable Gate Arrays
  3. XDL router info needed

XDL router info needed

hi ALL!!

i have a small query, FPGA geeks help me plz...

I have a question on the XDL report, i am acually trying to move a circuit by modifying the XDL file, btw i am using a Virtex II FPGA.

i have been successful in moving the slices and the pins to differnt locartion but not the routers, i was able to decode the slice info., but not the routrers information. Please help me in decoding the routers info.

i have attached a small report on the routers info from the XDL file, the info that i have attached it the output net of the 2 input AND gate. ======================================================= net "Z_OBUF" , inpin "Z" O1 , outpin "Z_OBUF" Y , pip R17C1 Y3 -> OMUX10 , pip LIOIR16 OMUX_NW10 -> IOIS_FAN_BX2 , pip LIOIR16 IOIS_FAN_BX2 -> O1_B1 , ; =========================================================

i want information on OMUX, FAN_BX2, and where i can get info on them, please help me with the routers info, i am stranded with this for the past 3 days. i will thanful if you could throw some light on it.

A speedy reply will be appreciated.

Reply to
potter
Loading thread data ...

You can create a complete device description with xdl:

e.g.: xdl -report -pips v50pq240-5 v50pq240-5.xdlrc

It contains also information about the routing fabric. Beware, the file becomes awfully large

-Markus

Reply to
Markus

Hey Markus,

thanx for the info...I did print this *.xdlrc before, but dint quiet understand the pips connection, would it be possible for u to explain me a little bit, i have understood the OMUX, IMUX, etc, but not the FAN_BX2...IOIS_BX2 etc....can you help me...

thanx in advance

Reply to
Superman

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.