How to open the interface GUI of ChipScope Pro Analyzer on linux

Hi,

From the ChipScope user guide:

On 32-bit Linux systems, you can invoke the analyzer from the command line by running: /bin/lin/analyzer On 64-bit Linux systems, you can invoke the analyzer from the command line by running: /bin/lin64/analyzer

where represents the location where the Xilinx ISE Design Suite tools are installed.

For example, default ISE installation on 64-bit machine: /opt/Xilinx/12.4/ISE_DS/ISE/bin/lin64/analyzer

Thanks, Evgeni

=======================================

One more thing. Xilinx only supports certain Linux distributions, such as RHEL. I've seen quite a few problems using ISE GUI tools, such as FPGA Editor, ChipScope analyzer, on Ubuntu, which is not supported.

Thanks, Evgeni