0.190" may not be too far off from a good fit.
?-)
Cable bushings, grommets, for small data cables
Jan 18, 2012
24 Replies
it's for manufacturing eas of the moulder that way the outside angles can be square and they can still extract the die from the finished part.
?? 100% natural
Put a drop of cyanoacrylate glue on the cable and pull it back into the grommet, it will only anchor the jacket, but often that's enough.
?? 100% natural
That's what I am trying to avoid, any sort of glue process. It can be done but it's messy and undesirable for most contract mfgs. Got the Richco samples this week and what I feared is true: The SB-1 grommet is way too small and would squish the cable. The SB-2 is too large. And they've got nothing in between. Beats me why not.
Regards, Joerg
http://www.analogconsultants.com/
Ok, but none of the other enclosures I have here are slanted. And neither were the ones we designed ourselves. Problem is, this time the quantity isn't high enough to justify our own moulds.
Regards, Joerg
http://www.analogconsultants.com/
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required