Electronics Repair

21792 Threads Posts
to

Sony KV-20TS29 Mainboard removal

Can anyone tell me the trick to removing the main circuit board from this Sony set? The horizontal output is going and...
3 comments posted 21yrs
posted by mjwallin
3 comments posted 21yrs posted by mjwallin

OT: US or UK English - spot the difference

Here is an excerpt from a booklet that came with my Sony/Ericsson phone entitled "Important Charging Information". The...
6 comments posted 21yrs
posted by fzabkar
6 comments posted 21yrs posted by fzabkar

Panasonic Camcorder pvl-354

I recently bought a Panasonic pvl-354 camcorder on Ebay from a guy who said it was working fine but needed a charger.It...
4 comments posted 21yrs
posted by waybel
4 comments posted 21yrs posted by waybel

Samsung Topline 100

Hi, got an old samsung topline 100 cordless phone. Still working great - BUT: as soon as the battery (three nimh- cells...
0 comments posted 21yrs
posted by tomasherrmann
0 comments posted 21yrs posted by tomasherrmann

Packard Bell A720 odd problem

Monitor picture too wide and bent on the sides, you can push the buttons and see the adjuster slide but it has no effect...
3 comments posted 21yrs
posted by nekobe
3 comments posted 21yrs posted by nekobe

Zenith TV upgrade question

Hi, I have an older 25" Zenith, model SJ2524VK5, main module 9-1130-3A, CRT # A63ADG31X. This is a really nice working...
5 comments posted 21yrs
posted by poster420
5 comments posted 21yrs posted by poster420

Vessel hand tools in the USA?

Does anyone know where I can purchase Vessel made hand tools within the USA?
0 comments posted 21yrs
posted by nocturnal
0 comments posted 21yrs posted by nocturnal

Sanyo oven weak.

We've been satisfied with a Sanyo convection oven for four months. Now I have to turn the temperature setting to maximu...
7 comments posted 21yrs
posted by Sam
7 comments posted 21yrs posted by Sam

Magnavox 20MS3442/17 now dead

Dear All: I have been given Magnavox 20MS3442/17 TV which had vertical deflection problem - top half of the screen was...
1 comments posted 21yrs
posted by oigor
1 comments posted 21yrs posted by oigor

ATX power supply upside down?

Can ATX power supply work when mounted upside down? Its 300W (Chaintech) but with small load (Amiga 2000).
17 comments posted 21yrs
posted by orangeKDS
17 comments posted 21yrs posted by orangeKDS

Mitsubishi C28D7B Tv (help!)

I have a Mitsubishi 28 Inch Tv that has worked well for a few years, however recently some ringing on the sharp edges o...
2 comments posted 21yrs
posted by aust_powers
2 comments posted 21yrs posted by aust_powers

Cyberhome 700b LCD Flex interconnect

Hi all! I have a pair of Cyberhome 700b's with the same problem. The RT. Hinge was over worked and the LCD interconnect...
0 comments posted 21yrs
posted by tmidsl
0 comments posted 21yrs posted by tmidsl

Optical mouse questions

Not that it matters with current pricing, but i was wondering what usually fails in an optical mouse. I have a few that...
18 comments posted 21yrs
posted by nekobe
18 comments posted 21yrs posted by nekobe