I was given a Sony KV27S35 TV that works, but the case is all busted up, as in shattered. The back is just fine. The front case and the circuit board holder are brittle and I wasn't given all the pieces. It seems a great shame to just toss the wole thing, but I can't figure out a good way to support the tube and the board in a reasonable fashion. Any ideas, or someone sitting on a good case? I'm in the Kansas City area.
WT
Dear Friend,
Please let me have some picture of your TV case first and based on that I will help you.
Be carefull with the CRT Tube and the Circuit Board.Try to find out similar TV case.
See you Online. GO1.WEB
"Make the Future Better!"
=A0Any ideas, or someone sitting on a good case? =A0I'm in the Kansas City area.
>
There was a relatively short run of TVs made during that era that had plastic cabinets that are experiencing polymer decay. Sonys, Panasonics, JVCs, Hitachis and Toshibas all have the same problem. They become more and more brittle as they age. I had a couple of guys carry in a 32" Sony to be repaired that was breaking up in their grip as they brought it in my shop, and literally came apart as they placed it on the floor. Pure junk. Problem is, any cabinet you find will likely be suffering the same malady to some extent, and a different year will probably not fit the main board.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required