Hit power button, relay clicks on and no picture or sound. Hit power button and can hear relay release. Relay will stay energized til power off hit. No HV to CRT. What should I check for? Thanks
- posted
18 years ago
Hit power button, relay clicks on and no picture or sound. Hit power button and can hear relay release. Relay will stay energized til power off hit. No HV to CRT. What should I check for? Thanks
Glenn:
There is a known problem with those relays. Go look at the Sharp service bulletin I have uploaded to this location:
Robert McPherson snipped-for-privacy@bellsouth.net
After looking closer, the solder joint at the load point (switch output) on the relay had been arcing. Resoldered and works fine now. Thanks for the reply Robert.
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.