Customer brought in:
Phillips Model: 19PS56C125 Chassis: 19E800 7584 Manufacture Date: Sept 1999
Dead on arrival.
Opened it up and found:
- 4amp fuse blown black
- Diodes 6502 = open and 6504 = shorted (1N5062-TFW)
- FET 7518 = shorted G-D-S (P6NA60FP)
- HOT 7402 = OK (BUT11APX)
There is a burned spot on the PCB side that has fractured 2 surface mount components that I can not distinguish what they are. They are located side-by-side near transistor 7400. One has an identifier as 2402 and the other is ?420.
I would be most appreciative if anyone that has lit on this set could research what those 2 burned components are. With that info, maybe it will be an easy fix after that.
Thank you,
Lenny Marietta, GA snipped-for-privacy@earthlink.net