1. Home
  2. Electronics Repair
  3. Hacking Pioneer SR type wired remote control into VCRs, DVD players, etc.

Hacking Pioneer SR type wired remote control into VCRs, DVD players, etc.

I just created a blog about how I added jacks to a VCR and DVD player to allow them to be hooked up to a Pioneer SR control bus. Check it out if you're interested.

formatting link

John

Reply to
John
Loading thread data ...

Wow.. I don't think I would have ever thought to do that. It is cool but I wouldn't have thought of it.

Reply to
Michael Kennedy

I have a Pioneer DVD player and a Pioneer receiver both with remote control and both without the control jacks. Is this a recent thing or an american thing ?

--DF

Reply to
Deefoo

I have a pioneer reciever without a remote control from the 1980's and it has something similar. It has the 2.5mm jacks and if you push a button on the reciever it will switch to that input or push a button on the tape deck it will switch to that. There is no IR reciever though.

- Mike

Reply to
Michael Kennedy

Not all of the Pioneer stuff has the jacks.

John

Reply to
John
404

Did it move?

Reply to
William R. Walsh

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.