1. Home
  2. Electronics Repair
  3. Brother MFC-890 and "PLS OPEN COVER"

Brother MFC-890 and "PLS OPEN COVER"

Dear people,

I have a Brother MFC-890 multi-function machine (you know - printer, copier, scanner, faxer, and digital picture printer).

It's been absolutely fine for about a year. (Yeah, the warranty year.)

But all of a sudden now, when trying to print out Christmas cards (based on a jpeg in Paint Shop Pro) it has gone hooey. It now has a problem with printing big images. (It's not only from Paint Shop Pro.) It still prints texts without problems.

Now, if you hold down the "Menu/Set" button as you power up the MFC, you get into Maintenance Mode. A whole bunch of (very intriguing) features accessed by two digit codes. You can get cryptic print-outs of all sorts of data held by the machine's memory. The total number of pages printed, the number of (billions!) of dots it's done, the number of hours it been on, etc. Entering the digits "82" -- as per the instructions of the not so useful UK Brother Helpdesk -- gives you the machine error code. In this case it yields: "MACHINE ERROR 00". "99" exits maintenance mode.

One in five times, it might print out the Christmas card without a hitch. The rest of the time, it's forever cleaning itself -- all the colours -- and rapidly depleting the ink cartridges. Hand in hand with this, it randomly asks to "PLS OPEN COVER", beeps, and waits. The only thing to do is to open the cover. It then immediately tells you "PLS CLOSE COVER" and, well ... in two weeks, I've got 4 out of 30 Christmas cards done.

Now, it being 2005, the first intuition that comes to one's mind is: this is a deliberately designed firmware "failure mode", which kicks in around the time the years warranty expires, designed to get you to waste lots of money on inks for a while, and then to be told (by some poor sap reading from a helpdesk script) that a service centre must "fix" it, for a whole lot more. In more honest times, this was called a "protection racket".

I'd love to find out that, in this case, this is not the problem.

Can anyone shed light on the matter, or share a similar experience and its outcome?

With kind regards,

Sandy

P.S. For the first time ever, when copying just now, it has done the "PLS OPEN COVER" crap. It also started cleaning itself before every run of copies. And why am I copying? Yes, it's to complete 30 copies of those Christmas cards! O Brother where art thou??!

--
Alexander Anderson 
(Yorkshire, England)

       Where there is no vision, the people perish.
Reply to
Sandy
Loading thread data ...

Hmmm a trifle irritating to say the least. What is supposed to happen is when you open the cover and close it again you will get a machine error code that indicates what went wrong, or you will get no code which means the error was transient and went away. Helpful eh? What is probably happening is there has been a transient error. If you go to maintenance mode and enter function 80 you should get a display of the machine log, that may hopefully give you some machine error messages if it does then post them here and I will try to translate for you. Tony

Reply to
Tony

of

I had a different Brother MFC (cost me $400). Almost exactly a month after it went out of warranty--and immediately after spending 0ver $50 on expendables) it started a routine much like the OP's. In my case, it was a paper feed error, which wouldn't allow the machine to initialize--rendering ALL of the functions (fax, printer, scanner, copier, fax modem)--inoperative. It would tell me one error, I'd clear that one, it would crank through part of it's routine and give me another.

I opened it up against the advice of a few here, and discovered for myself what many had told me: it was a nightmare to repair. I never did discover the exact cause, although I suspected a sensor problem...junk POS.

I tossed it and got an HP...lots easier to service.....

jak

Reply to
jakdedert

In article , Tony wrote

...

Dear Tony,

This is very kind of you. Function 80 gives me the serial number of the machine. Are you sure you meant 80?

With kind regards,

Sandy

--
Alexander Anderson 
(Yorkshire, England)

       Where there is no vision, the people perish.
Reply to
Sandy

Ah, sorry Sandy, my instructions were incomplete.... See here -

Fisrstly enter maintenance mode, then (1) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode. The USB serial number appears on the LCD. (2) Press the Fax Start key. Each time the Fax Start key is pressed, one of the following log information items appears on the LCD in the order given below.

1) Ink cartridge drop count, indicating how many droplets have been jetted out from each of the ink cartridges (Note 1) 2) Ink drop count after near-empty, indicating how many droplets have been jetted out from each of the ink cartridges (Note 1) after the ink empty sensor detects near-empty 3) Total ink drop count, indicating how many droplets the equipment has jetted out from each of the ink cartridges (Note 1) since produced 4) Jam count, indicating how many times a paper jam has been occurred 5) Total page count, indicating how many pages have been printed since the equipment was produced 6) PC print page count, indicating how many pages the equipment has printed as an output device of the connected PC 7) Copy page count, indicating how many copies have been made 8) FAX page count, indicating how many received FAX pages have been printed 9) Purge count, indicating how many times the purge operation has been carried out 10) Wiper count, indicating how many times the wiper operation has been carried out 11) Ink cartridge change count, indicating how many times ink cartridge replacement has been made for each color (Note 1) 12) Error code of the most recent machine error (Note 2) 13) Error code of the most recent communications error (Note 3) 14) ADF jam count, indicating how many times a document jam has occurred 15) ADF page count, indicating how many documents have been fed 16) Flat-bed page count, indicating how many documents have been scanned

To stop this operation and return the equipment to the initial stage of the maintenance mode, press the Stop key.

Note 1 - To check each of the four ink cartridges, press the Menu key. Pressing the key cycles through black, yellow, cyan, and magenta. Note 2 - When a machine error code is displayed, pressing the Menu key cycles through recent nine errors that have occurred. Note 3 - When a communications error code is displayed, pressing the Menu key cycles through the latest 3 errors.

Item 12 (see note 2) may give us some clues. It will probably only give error code numbers but I can tell you what they mean (there are dozens of different error codes). Good luck Tony

Reply to
Tony

In article , Tony wrote

Dear Tony,

I got a list of machine errors as follows: 1 - A1 2 - 33 3 - A1 4 - 33 5 - A1 6 - 33 7 - A1 8 - 33 9 - A1

The comms error list was: 1 - 17070000 2 - 0000FF00 3 - 17070000

The machine errors look like they come as related pairs. And so are the comms errors. (I have a week old previous printout somewhere that lists the comms errors as 0000ff00, 17070000, 0000ff00.)

I am really, really intrigued as to what are "A1" and "33". I look forward to your answer.

Thanks again for your kindness.

With kind regards,

Sandy

P.S. In the meanwhile I have photocopied out my Christmas cards and now I'm guillotining them down to size -- before that long haul of writing to everyone we haven't spoken to all year.

--
Alexander Anderson 
(Yorkshire, England)

       Where there is no vision, the people perish.
Reply to
Sandy

Sandy wrote:

OK Sandy they don't appear to be related but I bet they are somehow.

Error code A1 is Scanner unit opened. (surprise, surprise) likely failure is Scanner open sensor actuator or Main PCB or Scanner unit.

Error code 3* (where * = any number) is likely failure is Carriage travel error or Carriage ASSY or Encoder strip (Any stains or scratches? Hooked correctly?) or Carriage motor or Main PCB or Power supply PCB or Purge unit or Head flat cable N or Driver PCB or Main chassis

For the moment I would ignore the error 33 because of the strong relationship between error A1 and your symptoms.

If you want to try the following it may help

Sensor Operational Check This function allows you to check the following:

- Document front sensor

- Document rear sensor

- Document cover open sensor

- CCD HP sensor

- Scanner open sensor

- Registration sensor

- Paper width sensor

- Purge cam HP switch

- Pump switching cam HP switch

- (Print head detector)

- Black ink cartridge sensor

- Yellow ink cartridge sensor

- Cyan ink cartridge sensor

- Magenta ink cartridge sensor

- Manual feed slot cover sensor

Operating Procedure (1) Press the 3 and 2 keys in this order in the initial stage of the maintenance mode. The equipment sounds 1100 Hz and 400 Hz tones cyclically for testing the speaker: NOTE: To stop beeping, press the Menu key. If the sensing status are as listed below, the LCD will show "DFDRDCFHCSCVRSPW" and "P1P2HDIKIYICIMMP," which can be switched by pressing the Fax Start key. Given below is the relationship between the LCD indication, sensor name and sensor status. LCD Sensors Sensing status DF Document front sensor No document detected. DR Document rear sensor No document detected. DC Document cover open sensor Document cover closed. FH CCD HP sensor CCD unit placed in the home position. CS Cassette sensor Not applicable to the MFC5200C/MFC890 CV Scanner open sensor Scanner unit closed. RS Registration sensor No recording paper detected. PW Paper width sensor No paper detected. P1 Purge cam HP switch Purge cam placed in the home position. P2 Pump switching cam HP switch Pump switching cam placed in the home position. HD (Print head detector) (Not used.) IK Black ink cartridge sensor Black ink cartridge loaded. IY Yellow ink cartridge sensor Yellow ink cartridge loaded. IC Cyan ink cartridge sensor Cyan ink cartridge loaded. IM Magenta ink cartridge sensor Magenta ink cartridge loaded. MP Manual feed slot cover sensor Manual feed slot cover closed. (2) Change the detecting conditions (e.g., insert paper through the document sensors, registration sensor or paper width sensor, open the document cover/scanner unit/manual feed slot cover, or remove the print head or ink cartridges) and then check that the indication on the LCD changes according to the sensor states. (3) To stop this operation and return the equipment to the initial stage of the maintenance mode, press the Stop key.

What this is saying is that when you press the Fax Start key the display should toggle between 2 sets of code lines. The two characters that correspond to the "CV" portion of one code line should change in the other code line when you open or close the scanner cover. If you are fortunate you may find this happens if the scanner cover or the immediate area near the control panel is sensitive to vibration or very slight movement, you can test this by wiggling the cover without lifting it more than a couple of millimetres or tapping around the control panel area (the sensor is actually under the control panel). If so the sensor or the actuating lever is at fault. If not then I suspect you have a more serious problem. There may be something loose in that area, or some slight damage. I have tried to make this less cryptic than it appears .

How old is the printer, if it is under warranty you should have a valid claim.

Good luck Tony

Reply to
Tony

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.