Xilinx XC3S400

30 discussions on ElectronDepot about the Xilinx XC3S400: what owners asked, what went wrong, and what fixed it.

What owners report

Pissed off with Xilinx - Spartan 3

14 week lead time for samples for the XC3S200. How can you prototype with that?It makes worry even more when it comes to manufacture where I might need quantity.

EP1C12 or XC3S400?

Hi,I've seen this prototype board from Altium that seems to have a very good price: comes in two flavours: one with an Altera Cyclone series EP1C12F324C8 and the other one with a Xilinx Spartand 3 XC3S400-4F456C. Both options have the same...

Maximum Current Draw of FPGA

I've reviewed the docs briefly but didn't find this information.I'm playing with a XC3S400 in a 256 BGA on the Digilent board. If I were to use all the available I/O pins to drive LEDs (that's 104 of them), and do something silly like turn...

RAM in Altera EABs and Xilinx Block Rams

I am using RAM in a processor design and I am having troubleunderstanding exactly how best to use these functions for my design. Iwill be using them to implement stacks, program memory and data memory. Ideally the write function will look...

Memory width on Spartan-3 boards

So, I have a 32-bit processor design which I'd like to move to the implementation stage, and I was wondering which of the currently-available boards have 32-bit wide memory... I don't really fancy designing my own because I've never...

New FPGA Development Board

A new product from Digiliant...All i can say is oooo! * Virtex-2 Pro XC2VP30 FPGA with 30,816 Logic Cells, 136 18-bit multipliers, 2,448Kb of block RAM, and two PowerPC Processors * DDR SDRAM DIMM that can accept up to 2Gbytes of...

All discussions