Xilinx ML300

25 discussions on ElectronDepot about the Xilinx ML300: what owners asked, what went wrong, and what fixed it.

What owners report

FPGA -> SATA?

I am looking for a way to read/write to a SATA drive from an FPGA. I've looked around. Nothing seems to fit the bill. Any ideas worth considering?Thanks,~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~MartinTo send private email: email = where: ...

Where is the xilinx online store gone?

Hi everyone,As I was buying some components from the Xilinx online store thismorning, I noticed that they no longer support silicon device anymore.It seems that it is now AVNET that is taking care of distributingXilinx FPGA online. The...

Virtex-4FX12MM: Any hardware MAC address accessable?

Hi all,my hardware guys are on vacation but I need to clarify this:The EDK soft cores like opb_ethernetlite need the MAC address asparameter. They do not provide a unique MAC address as default. You canimagine, what management effort would...

Xilinx Parallel Cable 4 (PC4) and Platform Flash JTAG

Hi!I am using a Spartan 2 XC2S150 Xilinx FPGA. I have a few questions onthe Parallel Cable 4 used for the configuration:1)The PC4 has a pin "Vref". If i am using Spartan 2 XC2S150 withVcco=3.3V and VCCINT=2.5, what should i connect to Vref?...

Quadrature Encoder ::

Hi all, Hope everything is fine on your side.Key Words: ML300 board, VHDL, XST, XPS, XilinxI have written a VHDL program(look post script)to count pulses fromquadrature encoder. Basically i read both the clocks(here QEP0 andQEP1) and count...

DDR SDRAM simulation model, ML300, Infineon

Hello all,I m working on an application using DDR SDRAM and i want to simulate(timing simulation) the DDR SDRAM working along with the module i havecreated. the DDR SDRAM which is implemented on my board (ML300) isInfineon...

All discussions