12 discussions on ElectronDepot about the Texas Instruments TMS320F2812: what owners asked, what went wrong, and what fixed it.
Hi folks!We are developing a system using the CAN bus to implement the networkconnecting different nodes. We have a PC that needs to ask for somedata (the node status) to the nodes that have to answer to the requestimmediately.In order to...
Hi:Today I took scope shots of a clock input to my Xilinx Spartan 3e,Digilent NEXYS2 board. The clock goes to a counter, simulating aquadrature encoder, as explained in post "Counter clocks on both edgessometimes, but not when different IO...
I?m looking for just the right counter/timer module to perform a veryspecific task. I have a quadrature encoder turned by an enginecrankshaft. The encoder has the usual A-phase, B-phase and Indexoutputs. With respect to the encoder?s...
I am looking for - a microcontroller (single chip, no separate memories)- fast (50..100 MIPS would be nice, more is better)- reasonable amount of memory (at least 16k FLASH code, 16k RAM)What are the alternatives in this field? I know the...
Hallo,kann mir jemanden einen DSP empfehlen der folgende Merkmaleaufweist (oberstes hat höchste Priorität)-Rechenleistung um 500kHz Basisband zu verarbeiten(etwas mehr Reserven schaden nicht. Aber kein Blackfin...
Howdy - I've been thinking alot about brushless motor control lately.I've been using some COTS brushless motor controllers and have beenvery unsatisfied with them - they've all been overly large, overlycomplicated, and overly costly. So I'm...