22 discussions on ElectronDepot about the Philips SJA1000: what owners asked, what went wrong, and what fixed it.
I am going to work on a project involving multiple devices on the samenetwork(3 or more). One device will have user input and display(master).The other devices(slaves) will just collect sensory data and possiblyprocess PID control loops....
Hallo,ich stehe kurz vor meiner Diplomarbeit und suche das "Herzstück"meiner Schaltung.Also, ich umreiße mal kurz die Aufgabenstellung:Ich habe 3 Eingangssignale:Impuls (Drehzahl)AnalogsignalCAN-Bus Nachricht (langer oder kurzer...
Where should someone look for a CANbus consultant? We have a need for a CANbus design and the corresponding programming.
Hello everybody,I want to connect a Xilinx CoolrunnerII (XC2c256) to the CAN-Bus. To make it easy I would like to use a ready to use CAN-bus driver chip (as much of the protocol implemented as possible). Any suggestions? How many of the...
Hallo,demnächst möchte ich unser schon etwas betagtes MC68HC11-Board etwasmodernisieren.Abkündigungen von Bauelementen, wie dem SAE81C91 von SIEMENS machen diesenSchritt leidernotwendig.Also was solls, machen wir einen Schritt nach vorn:...
I'm working on retooling a project that is an embedded Intel Core i3 system running Linux with a PCAN mPCIe card to interface to our two CAN buses. Cu rrently we're using an Intel NUC motherboard, but we want to move to a COM- Express...