Embedded Linux

  1. Home
  2. Embedded Linux
3509 Threads Posts
to

Worth reading in Embedded Linux

building your own hardware

After searching around for an inexpensive board with: 2+ megs ROM 8+ megs RAM 3 ethernet ports that costs less than the...
7 comments posted 23yrs
posted by joshmccormack
7 comments posted 23yrs posted by joshmccormack

Embedded linux on Thin Client PC

Hello I'd like to know if someone has tried to port linux on a Thin Client PC. I don't mean Linux Thin Client, but a rea...
3 comments posted 23yrs
posted by xavier
3 comments posted 23yrs posted by xavier

Building a User-Land

Can someone tell me where I can find documentation or a site on building a "Userland" for an embedded system? I cant see...
4 comments posted 23yrs
posted by goldstonrumpke
4 comments posted 23yrs posted by goldstonrumpke

Installing on a CF

Ok, I would LIKE to install linux onto a bootable CF. Maybe someone here can help me. I have a 12 MB CF card. If I coul...
9 comments posted 23yrs
posted by batman
9 comments posted 23yrs posted by batman

target builder tools for embedded-like system

i've got a relatively simple goal. set up a solid-state, VME, compactflash(as ide) type box that will support a single...
11 comments posted 23yrs
posted by harry-removethis
11 comments posted 23yrs posted by harry-removethis

low cost board advice

I'm looking for a board with (or could be added to) 3 nics, 2 mgs or more storage, 8mgs or more RAM that could run a sm...
0 comments posted 23yrs
posted by joshmccormack
0 comments posted 23yrs posted by joshmccormack

Kernel support for PLX9056

Hello, We are developing a board with an MPC860T processor and a PLX9056 local-to-PCI bridge. This is somewhat similar...
0 comments posted 23yrs
posted by joris.lammers
0 comments posted 23yrs posted by joris.lammers

Comparison between RTLinux and RTXC

Does anybody has any performance comparison data between RTLinux and RTXC. If somebody can provide information / inform...
0 comments posted 23yrs
posted by ksraval2001
0 comments posted 23yrs posted by ksraval2001

PPC crosscompiler building using cygwin

Hi, has anyone managed to build a cross compiler for the powerpc (405) running under cygwin environment and using glibc...
1 comments posted 23yrs
posted by potr
1 comments posted 23yrs posted by potr

Hard disk on embedded system..

Hello, I present myself: I come in this forum for the first time, I am a French developer and I seek information on lin...
1 comments posted 23yrs
posted by sebastien2003
1 comments posted 23yrs posted by sebastien2003

Help With Boa On Axis 2100 Network Camera

Hi I have an Axis 2100 Network Camera and have written and transferred my own web page. It is in /etc/httpd/html and is...
2 comments posted 23yrs
posted by nospam
2 comments posted 23yrs posted by nospam

Affordable platform for Linux router?

I'd like to built a little Linux router on a somehow ultraaffordable hardware plat like a Linksys WRT54G: http://www.ba...
0 comments posted 23yrs
posted by sfs_news
0 comments posted 23yrs posted by sfs_news

BDI2000 Config file for AT91RM9200 / CSB337

Howdy Folks, I just turned my CSB337 board into a doorstop, but I have this nifty BDI2000 BDM at my disposal so all is...
0 comments posted 23yrs
posted by jasongaiser
0 comments posted 23yrs posted by jasongaiser