Re: W USA też warto patrzeć mechanikom na ręce

W powyższym artykule piszą że u GM i Hondy jest jakiś czujnik (sensor) który wykrywa 95% zużycie oleju silnikowego...

Czy ktoś się orientuje jak działa taki czujnik?

Reply to
Pszemol
Loading thread data ...

Pszemol napisał(a):

Może wykrywa ile jest metalu w oleju, co można zrobić za pomocą jakiegoś czujnika indukcyjnego.

Reply to
Maksymilian Dutka

Pszemol schrieb:

może to?

A miniaturised high-shear rheometer using GaPO/sub 4/ resonators is described; it allows the detection of the rheological behaviour of Newtonian and non-Newtonian fluids. The sensor system that has been developed combines a torsional mode and a thickness shear mode resonator. When the resonators are immersed in a liquid, the frequency and the Q-value change: the higher the viscosity of the liquid, the lower the Q-value and the resonant frequency of the resonators. In order to measure in more viscous liquids, where excitation of the resonators by an oscillator is impossible, it is necessary to develop a special type of sensor electronics. The solution. presented is a low cost impedance analyser; its basic design and concept are outlined as well as first results in applying the sensor system in various non-Newtonian reference oils.

Waldek

Reply to
Waldemar

Pszemol schrieb:

no i tu ło:

formatting link
Waldek

Reply to
Waldemar

Niezelazne trudno tak wykryc, a ilosci sa tam malutkie.

No chyba ze ze wsadza sie je do silnikow zelaznych :-)

J.

Reply to
J.F.

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.