Welcher Kondensator ist dieser?

May 20, 2010 10 Replies

First reply

Uwe Hercksen

Hello, you may ask at EPCOS is the company now responsible for the former passive components subsidary of Siemens. Bye

Read the full reply
7 mm x 4 mm x 4 mm.

Elektrolytisch? Tantal?



Hersteller: Siemens.



Leistungsblatt?



Danke.


- - -



What capacitor is this?


7 mm x 4 mm x 4 mm.

Electrolytic? Tantalum?



Manufacturer: Siemens.



Data sheet?



Thanks.


Paul Conners schrieb:

Hello,

you may ask at

formatting link
EPCOS is the company now responsible for the former passive components subsidary of Siemens.

Bye

Sieht nach alten Tantal-Elkos aus.

(Look like ancient Tantalum electrolytics.)

-- cheers, J"org .-.-. --... ...-- -.. . DL8DTL

formatting link
NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-)

B45181-C4105-M

1µF, 40V, Tantal

1µF / 40V.

-ras

Ralph A. Schmid http://www.dk5ras.de/ http://www.db0fue.de/ http://www.bclog.de/

There have been several types 1984/84:

formatting link

This would be the german datasheet B45182

formatting link

In the 1985 prefered type list only the B45181 was mentioned.

MfG JRD

"Bingo!"

Zu jeder: vielen Dank.

Hallo,

Toleranz 5 % oder?

Bernd Mayer

"Ralph A. Schmid, dk5ras" schrieb:

Ich nahm an, dass das offensichtlich war. ;)

-- cheers, J"org .-.-. --... ...-- -.. . DL8DTL

formatting link
NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-)

Mein Gott, ihr könnt aber auch Fragen stellen...

+/-20%; kostete übrigens 59Pfennig, wenn man mehr als 500 genommen hat.

Glücklicherweise habe ich Lieferliste des Siemens Bauteile Service von

1986 nicht weggeschmissen und auch das Siemens-Taschenbuch "Röhren Halbleiter Bauelemente" von 1962/63 halte ich als Erbstück in Ehren. Wenn also noch jemand Kurzdaten von einem TF78, einer Tu7 (Tunneldiode) oder GD1Q benötigt, nur zu...

Mathias

Unklar ob das der "JN" Aufdruck hergibt.

J=5% K=10% L=15% ( typisch teutsch ... ) M=20%

Der gängige "Schwerpunkttyp" war aber 20%

MfG JRD

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required