1. Home
  2. Electronics Design
  3. Why is electronics so complicated?
  4. Page 10

Why is electronics so complicated?

It certainly would conduct better between two "flat surfaces" that are not as flat as an idiot like you thinks they are.

It is only for the fine gaps, idiot. Both faces are essentially flat, better rarely ever to the degree they would need to be for a dopey f*ck like you to even be able to see the miniscule difference. You know... like OPTICAL quality flatness AND polish.

Another surface quality 'thing' you are unaware of. The main body of the block would be directly interfaced, even if it was a mere, cheap extrusion without surface finishing.

Even when one thinks one has two flat faces, one should *still* apply gap filler media, even if it is only for fine scratches and gap management.

If silver filled epoxy was so bad ALL the chip makers would be using something else to attach their dies to the chip base with. They are not. They ALL use silver filled epoxy, and nearly all use the same one I have and use. EpoTek.

You are about as dumb as it gets. You would probably think that a simple two screw attachment would perform better.

Reply to
TheGlimmerMan
Loading thread data ...

You missed a lot more than I ever have. Here and anywhere else in life.

Reply to
TheGlimmerMan

The facts are the facts, John, and the fact of the day is that the CRAP that John Larkin posts in sed is 100% horseshit, and you are full of your own as well. Take your stinking ass elsewhere.

Reply to
TheGlimmerMan

See? He is obsessed with poop, butts, and all things colonic.

Yuk!

John

Reply to
John Larkin

They use silver epoxy because it's electrically conductive.

John

Reply to
John Larkin

Can you feel the love, Archie?

Reply to
Greegor

Archie, You really are a freakin' mental case. You have ""knowledge"" like Green Xenon.

You're a sociopathic idiot-savant with an ego.

How are you any different from Green Xenon with his goal of PUNISHING people in general because his misfit feelings got hurt?

He wants to post things that are taboo, provocative and "punishing" yet thinks it's all perfectly legal??

Savant enough to parrot the words free electron laser that someone else gave to him, but idiot enough to think that a huge and dangerous facility could fit in a thumble.

How are you any different than Green Xenon, Archie?

You're both idiot/savants and social MISFITS.

Lots of people who love technology are weak on social skills but you are way more extreme than that.

You have an actual brain disorder that you conceal. It could be as simple as ADHD or as severe as autism, but your PERSONALITY DISORDER is the most crippling.

I've seen how once a brain malfunction is labeled, little attention is paid to any PERSONALITY DISORDER the person might have, even if that is far more CRIPPLING.

Your rage is toxic and you try to dump it onto others. Isn't it amazing how you keep finding so much more?

You seem to be stuck at a Junior High level of emotional maturity.

What kind of academic education did you attain?

I would expect that you would have had a terrible time with parts of your education that would entail cooperation, getting along with others or human interaction. At some point that would get in the way of your ACADEMIC career.

Some of those "liberal arts" subjects to make you "well rounded" would have been troublesome.

Did you even graduate from high school, Archie?

Reply to
Greegor

Greegor:

  1. I can understand why you would think I'm Archie. However, I'm not. I am simply just me. I could care less if you continue to equate me with Archie -- which is why I've been hesitant to respond to this thread. However, you and all should understand that I'm a totally different person. Use IP-locator or other tracing software and you'll realize that Archie and me are two totally different animals.

  1. How is anything I would like to write in chat rooms illegal? Sure they may fit my goal of punishing the bad guys but I still have my 1st- amendment rights and can write pretty much whatever I want as long as I'm not making what are called "criminal threats".

  2. My only mental illness is that I'm an extremely warm-hearted, compassionate, law-abiding individual who respects right from wrong. Also, I believe in fairness and equality at all costs. I wouldn't hurt even an inanimate object no matter how upset I was. My empathy extends to non-living things. Even in the most intense rage, you'll never find me breaking things or ripping things apart. So YES, I am mentally-ill, but not for the reasons you describe. I don't even say bad things such as "I hate you" to an inanimate object.

  1. I'm interested in a lot of hypothetical technology/equipment/ devices/applications. However, I'm not fully educated about them. That is why I ask questions such as that about using a free-electron IRC laser to warm foods.

  2. I feel sad when a circuit clips due to overmodulation, which is why I always keep the amplitude of any music I play as low as I can get from the initial chain of the signal. If I need to increase the volume, I do it and the end of the signal chain [usually the amplifier built into the speakers]. Sure I get a lot of hiss, static, and other audible EMI/RFI but at least I don't have the guilt of over-driving any device.
Reply to
GreenXenon

Just call him "Scatman".

Reply to
krw

No, I don't know many that had to spit and shine shoes when they were growing up.

You obviously are an expert!

Jamie.

Reply to
Jamie

No, Johnny. They use it because it conducts HEAT as WELL AS being electrically conductive. The device they bond it to is where the user places the heat sink. Simple physics, boy.

D'oh!

Reply to
TheGlimmerMan

Silver is expensive. If all they wanted was thermal conductivity, they'd use something cheaper. The epoxy dominates theta, and the fill, ceramic or silver or diamond, doesn't make all that much difference. If the fill particles increase the gap, they can actually make theta

*worse*.

It has to do with numbers. You wouldn't understand.

John

Reply to
John Larkin

Just like 'smart and dumb' as it relates to you, eh.

You fit the "dumb" moniker to a tee.

Reply to
TheGlimmerMan

YOU authoring these retarded "here's Johnny" posts are as stupid as it gets. You have ZERO qualifications, and it shows, asswipe.

That last several paragraphs of total and utter horseshit proves that fact beyond doubt.

YOU are the dysfunctional little bastard on this bus, boy.

Reply to
TheGlimmerMan

You give the retarded stalk boy twit too much credit.

He is too goddamned retarded to actually know how a modern network, much less a modern protocol works.

Reply to
TheGlimmerMan

Polish numbers are for metal polishing, like that found on stainless steel, you retarded f*ck. It has nothing to do with shoes.

Thanks for proving to the world yet again that you are nothing more than a retarded little twit.

Reply to
TheGlimmerMan

Already taken. It's John Larkin's pseudonym:

formatting link

Best regards, Spehro Pefhany

--
"it's the network..."                          "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Reply to
Spehro Pefhany

Nice hat, John! ;-)

Reply to
krw

He looks better without the giant 'stache.

Best regards, Spehro Pefhany

--
"it's the network..."                          "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Reply to
Spehro Pefhany

I was trying to remain focused on the hat.

Reply to
krw

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.