Does this exist...
Ball and _Slot_ as opposed to the usual Ball and Socket.
Low load. Hobby size... maybe 1/4" to 1/2" ball. ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
Dovetail exists, But have never seen ball and slot. Yes, spherical cutters for soft metals exist,so you can do the slot part.So depending on choice of materials, yes, that can be made in the average machine shop.
Steve
Brings up a few thoughts...
Dovetail material suggests just using a bolt-head instead of a ball.
I found I couldn't accurately drill my stainless adapter bar (for the barby), so I took it to a machine shop. It's supposed to be ready today, I'll ask the machinist about spherical cutting. ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
-- Probably the easiest way to get it is to have a friendly local machinist make it for you.
I have seen square top screws inserted and will not twist when you tighten.
greg
Looks like a standard "T" bolt slot to me ! Like on lathe or machine beds but with a radiused bottom.
--
Best Regards:
Baron.
Just dawned on me. Piece of pipe, slotted ;-) ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
Steve
TRY: Carriage bolt (coach bolt) Has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck carriage bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed.
NOT: The original usage of the term stovebolt applied to a bolt with a slotted head that fastened into a nut. This particular bolt design was often used as a fastener on wood-burning stoves that were fabricated out of metal sheets, very common in the first half of the 20th century. Therefore, any slotted-head bolt that looked similar to the bolts in wood-burning stoves became referred to as a stovebolt.
"WrongAgain!"
What is it about that PDF that makes it hostile to Acrobat?
Robert,
It was created with Acrobat v7.1.0, by scanning directly into Acrobat... "make PDF from Scanner".
Given all your various symptoms, I think you have something else wrong other than Acrobat.
Do you have Acrobat, or do you really have Adobe Reader?
Try looking at installed programs... do you have more than one program that might be trying to read PDF's? ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
Which brings a further thought... what do they call that wrap-around cylinder of ball bearings sliding on a shaft? ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
-- I\'d almost forgotten about that beautifully clever piece of work! Thanks for the jolt back. :-)
Thanks! I think that will be a better off-the-shelf solution than my hare-brained "ball-slot" ;-) ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
Acrobat is... lets say... shit! Use foxit reader instead!!!!
Acrobat is a _creator_, Foxit is a _reader_.
I'm curious, what do you folks with "Acrobat" problems have also installed on your PC's? I suspect freebie virus scan programs.
I have one machine with v4, v5 and v7 co-installed. No problems. I use v4 for schematics, v5 for form creation and v7 to read stuff the other versions won't and it also handles scanning nicely. ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
Commonly referred to as a "stove bolt". (not commonly, That IS what it is called)
I have the full Acrobat 4.05 for reading and printing (to PDF). I have seen this problem before, so i installed FoxIt (which read your PDF correctly). Acrobat is the default.
v4.05 can't cope with some features from v7.1, though, IIRC, I did reduce the scan to v4 compatibility before posting. ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
Try retrieving again...
It definitely has been made v4 compatible now. ...Jim Thompson
-- | James E.Thompson, CTO | mens | | Analog Innovations, Inc. | et |
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.