Microcontroller Discussions

Question: the use of JTAG interface on Atmel ATmega2560 CPU.

Hello all , I use the JTAG - ISP programmer from E-LAB, http://www.e-lab.de/pdf/ISP3_en.pdf And the JTAG connector is c...

1 comments posted 18yrs

posted by jo <nomail

1 comments posted 18yrs posted by jo <nomail

question: the use of JTAG on ATMEL ATmega2560 cpu

I use a MCU card with ATMEGA2560 Microcontroller from http://www.mikroe.com/en/tools/mcu_cards/avr/bigavr/ Now I connec...

0 comments posted 18yrs

posted by jo <nomail

0 comments posted 18yrs posted by jo <nomail

Getting started with AVR - newbie question

Hi, I've picked up my soldering iron again after 30 years in software. I've been at it for six months, and I'm at a poi...

0 comments posted 18yrs

posted by mr.intj

0 comments posted 18yrs posted by mr.intj

avrdude: AVR device not responding

Hi there, Just getting started with my first project. Im using a serial ISP programmer to program an ATMega162, and Im...

0 comments posted 18yrs

posted by cam.graham

0 comments posted 18yrs posted by cam.graham

Microchip 18F-

Good day all! As I'm strolling around usenet for a while, this seems a more or less active newsgroup, so I'll try posti...

0 comments posted 18yrs

posted by Phil333

0 comments posted 18yrs posted by Phil333

Somebody have something to say about the AT89C51ED2 and AT89S8253?

I=B4m trynig to develop a firmware for this two microcontrolers, but still having not results. Already had read the dat...

6 comments posted 18yrs

posted by ceduardodfernandes

6 comments posted 18yrs posted by ceduardodfernandes

Color LCD interfacing with AT89C51

This is a color lcd interfacing with AT89C51 http://lcdinterfacing.googlepages.com/colorlcd Thank You

1 comments posted 18yrs

posted by 2006nimish

1 comments posted 18yrs posted by 2006nimish

weight sensor

Does anyone know where I can get an low cost weight sensor? I have looked and looked and looked but can't find one anyw...

2 comments posted 18yrs

posted by jpsb

2 comments posted 18yrs posted by jpsb

WIZ-C

Anyone with experience using the WIZ-C PIC developement software care to give their 2 cents? Compare it to the more expe...

2 comments posted 18yrs

posted by Me

2 comments posted 18yrs posted by Me

PIC16F916 PortA as input

Hi, Is there anyone using PIC16F916's lower half of portA (RA0~RA3) as digital inputs? I have problem on these pins. I...

2 comments posted 18yrs

posted by danzhu_woo

2 comments posted 18yrs posted by danzhu_woo

Programming ATMega8515

I'm trying to program ATMega8515's using STK500 and have not had any luck. I've programmed ATMega16's and AT90S8515 OK...

8 comments posted 18yrs

posted by lyttlec

8 comments posted 18yrs posted by lyttlec

multiple CP2103-EBs USB-to-RS232

Hi all - I got the Silicon Laboratories CP2103-EB inteface kit from DigiKey. This is an adapter from a standard USB con...

3 comments posted 18yrs

posted by starfire151

3 comments posted 18yrs posted by starfire151

anyone used silicon labs CP2103-EB?

Hi all - I got the Silicon Laboratories CP2103-EB inteface kit from DigiKey. This is an adapter from a standard USB con...

2 comments posted 18yrs

posted by starfire151

2 comments posted 18yrs posted by starfire151

PIC 16C57 - yes - a 10 year old project needs modifying - please read

Hi First time I've submitted to this group and unfortunately it has to be to ask some kind soul for some help. For the...

4 comments posted 18yrs

posted by potriceReMoVe

4 comments posted 18yrs posted by potriceReMoVe

PIC Data EEPROM

Hi All I am currently using a 18f4431 to control motor position. During program execution I have a few variables I stor...

3 comments posted 18yrs

posted by williamsmith57

3 comments posted 18yrs posted by williamsmith57