14 discussions on ElectronDepot about the Xilinx ML402: what owners asked, what went wrong, and what fixed it.
I want to create a 1152 by 6 bit rom and I want to usea bram. It can be clocked or not clocked, but I'd prefernot clocked. Can someone point me to a template?Something like this takes a long time to synthesize...library IEEE;use use entity...
Hello,I've implemented a camera link deserializer interface based on avirtex 4 FPGA (using ML402 development board). I'm using the LVDS 2.5V inputs of the board and a cable with one end open.The module works fine when i use a short cable....
Does any one have any software (or experience) to share (or sell) concerning bringing a USB2 camera image into a XILINX ML401, ML402, or ML403 board.Many thanks,Brad SmallridgeAi Vision
I am trying to program Xilinx Virtex4 evaluation board ML402 via ACE usingCompact Flash card. Every time when I turn the device on the red LED 'Err' turnson.
I have FPGA DSP design that has several RAM blocks. What is theeasiest way to transfer the content of the RAM to the PC? I am usingXilinx Virtex-4 ML402 board with Platform Cable USB.Thanks,Dan
I need to connect the Xilinx ML402 board to the 3.3V CMOS chip. I amconcerned about the ESD that could burn the CMOS chip.I am concerned about the possibility of the ESD when CMOS is beingconnected or disconnected from the FPGA board's...