Transferring bits over FM ?

Likely this one would. Doing data on an FM link is actually fairly simple. If the data rate is low, an existing radio and an FSK signal is an easy way to go.

How long of a distance?

If you want to make life easy, just buy an RF data link from Sparkfun Electronics

BRW

BTW - If you're interested, I have a circuit design that uses 8-bit shift registers and those RF data links to continuously transfer 8 discrete bits from one end (of the RF link) to the other. It's very cool - turn on the bit at one end and it comes out the other very quickly. Let me know. I could email the design to you.

BRW

Home usage. (up to 100m ~ 300 ft)

EdV wrote:

Thanks for the link! I want to learn, but first I want to try if the concept works. (RF Link - 2400bps - 418MHz sounds great !)

Oh. If only I could design such things ... :( I hope one day I will be able to be an electronics hobbyist like yourself.

Thanks for the information

P.S. Which group is better for this k> >>

Neither.

The most appropriate place is sci.electronics.basics

Read Mark Zenier's guide the sci.electronics.* hierarchy: ftp://ftp.eskimo.com/u/m/mzenier/seguide9706.txt

INdeed, you should have done some work in the first place before cross-posting this message.

Michael

EdV wrote in news:1185210526.019815.167460 @o61g2000hsh.googlegroups.com:

How many are a "couple" How cast are they going to change?

for just a two or three that won't change often, I'd gate an audio oscillator per bit, and use a tone detector at the other end.

For more than that, I'd serially send the bits over AFSK.