Field-Programmable Gate Arrays

15255 Threads Posts
to

MAX II CPLD(fpga ?) Board

Hi, Anyone who wants to start(beginers) working on PCI, USB can have a look at Altera's MAX II Development Kit(they als...
0 comments posted 22yrs
posted by raonpc
0 comments posted 22yrs posted by raonpc

Xilinx ISE vs. SuSE Linux 9.x

I'm currently running SuSE Linux SLES8 AMD64, and ISE 6.2 works fine. I'm planning to upgrade to SuSE Linux 9.1 and was...
2 comments posted 22yrs
posted by spamtrap
2 comments posted 22yrs posted by spamtrap

std_logic_textio - in xilinx

ERROR:HDLParsers:3014 - d:/xilinx/8051/mc8051_rom_.vhd Line 68. Library unit std_logic_textio is not available in librar...
0 comments posted 22yrs
posted by anonim99
0 comments posted 22yrs posted by anonim99

delivering VHDL (RTL) IP core to my customer: how ?

Hi all, I am in the case where I need to provide large VHDL code to a customer. The design is very large, with some par...
3 comments posted 22yrs
posted by laurent.gauch
3 comments posted 22yrs posted by laurent.gauch

New to FpGa ; At configuring the device error cmes

hello friends, I'm a new bee to fpga,, i have one board in that i have spartan II xc2s100 -5tqfp144. ok. that board mea...
7 comments posted 22yrs
posted by bhuvasen
7 comments posted 22yrs posted by bhuvasen

Simple FPGA board

Hi, We are searching for a simple FPGA board with : * A cPCI interface * Available clock dedicated pin, so we can drive...
5 comments posted 22yrs
posted by
5 comments posted 22yrs posted by

Simulation probs with Altera LPM_FIFO+

I am having problems simulating fifos with quartus and modelsim. My environment is set up as follows: Quartus II v4.1 S...
4 comments posted 22yrs
posted by johnnynorthener
4 comments posted 22yrs posted by johnnynorthener

Placement vs Map in 6.2i, sp3

I'm trying to do a modular design, building a core, placing it, creating an RPM then going on to a sibling or (finally)...
3 comments posted 22yrs
posted by news
3 comments posted 22yrs posted by news

AD: ACEX 1K50 FPGA board clearance sale

I have a few Altera ACEX 1K50 board for sale: Each board contains: ACEX EP1K50TC144-3 128 KB RAM 512 KB Flash (configur...
3 comments posted 22yrs
posted by martin.schoeberl
3 comments posted 22yrs posted by martin.schoeberl

Two questions about FFs

SHIFT: process (CLK, RST) begin if Rising_Edge(Clk) then if RST = '1' then -- D
1 comments posted 22yrs
posted by valentin_NOSPAM_NOWORMS
1 comments posted 22yrs posted by valentin_NOSPAM_NOWORMS

new to fpga

My company is going to start getting into the area of digital signal processing for one of our projects. FPGAs seem to...
2 comments posted 22yrs
posted by mwiesbock
2 comments posted 22yrs posted by mwiesbock

Picoblaze VHDL Code Block diagram

I am interested in adding a "busy" signal to the Input/Ouptut port of the Picoblaze. This will allow me to add a Wishbo...
1 comments posted 22yrs
posted by ericjohnholland
1 comments posted 22yrs posted by ericjohnholland