Electronics Equipment

DEBCO oscillators ???

does anybody have any info on these oscillators . i was thinking of using the 30.0 oscillator to calibrate an old hallic...

0 comments posted 16yrs

posted by wbelsito

0 comments posted 16yrs posted by wbelsito

Fluke 332A DC Calibrator Manual needed

The one on the Fluke site is missing one of the schematics. Anyone have one or can scan just the first schematic? Thanks...

0 comments posted 16yrs

posted by noone

0 comments posted 16yrs posted by noone

USB Oscilliscope

My employer is willing to pony up $1500 for this oscilloscope. http://www.usbee.com/dx.html Are there any better option...

3 comments posted 16yrs

posted by brumfield47FAKEPART

3 comments posted 16yrs posted by brumfield47FAKEPART

is this (unknown) hardware coming out from any boatanchor or old test equipment??

http://xoomer.virgilio.it/egirland/unknown/index.html Tubes are: one EF800, one EF80 and one ..missing (??). Can anybod...

16 comments posted 16yrs

posted by emanuele_girlando

16 comments posted 16yrs posted by emanuele_girlando

Case or pouch for Fluke 87 + probes?

I've got a new 87 and I want to get a protective case for it. Fluke wants $35 for what amounts to a piece of pleather a...

15 comments posted 16yrs

posted by invalid

15 comments posted 16yrs posted by invalid

GPIB instructions for a Nicolet 2090 scope

Hi Does anyone have a list of the recognized GBIB instructions for the Nicolet 2090 scopes? Thanks Dwight

1 comments posted 16yrs

posted by dkelvey

1 comments posted 16yrs posted by dkelvey

Model 200 Optical Spectrum analyzer

I finally bought the analyzer. It is great for my purpose and I developed a serial interface to make it compatible with...

0 comments posted 16yrs

posted by mporzio

0 comments posted 16yrs posted by mporzio

electronic box

Hello When I make my electronic stuff I often have a problem to get a box to put it in : They are expensive an often in...

1 comments posted 16yrs

posted by emmanuel_robert

1 comments posted 16yrs posted by emmanuel_robert

Searching for Texas Instruments GPIB controller TMS9914 user manual(s)

Back in the mid 80s, TI published two user manuals for their TMS9914 GPIB controller chip - TMS9914 TMS9914A Gpib Contr...

2 comments posted 16yrs

posted by jflan

2 comments posted 16yrs posted by jflan

Re: Reviving Test Equipment After A Long Storage Period

>What is the recommended procedure to bring test equipment >that has been stored for a long period? > http://www.vcomp.c...

2 comments posted 16yrs

posted by jeffm_

2 comments posted 16yrs posted by jeffm_

Tek TDS420 help?

This scope has the famous "FAIL ++ Acq" error which points to the infamous failed (and leaking) SMD caps on the acquisi...

13 comments posted 16yrs

posted by invalid

13 comments posted 16yrs posted by invalid

HP 8640b replacement combination gears available on E-bay

They are resin casted clones for the combination gears for the range and peak deviation module of the HP 8640b signal g...

3 comments posted 16yrs

posted by egirland

3 comments posted 16yrs posted by egirland

It's a cruel "computer" system

A cruel "computer" system refers to the system that was built and is being used by the Rothschilds in Malaga (and possi...

0 comments posted 16yrs

posted by fernangonzales04

0 comments posted 16yrs posted by fernangonzales04

Agilent Infiniium 54845A service disk/lithium battery

Hello all, I am looking for the 54845A service disk which is mentioned in the service manual and is part of the 54845-6...

0 comments posted 16yrs

posted by none

0 comments posted 16yrs posted by none

AN/TNH-21 tape recorder schematic or manual needed

Any suggestions, pointers, and help greatly appreciated. This may not be the right forum but I'm not sure what is! I've...

0 comments posted 16yrs

posted by navy.radio

0 comments posted 16yrs posted by navy.radio