Hi,
From time to time my Fluke equipment is used in a dirty environment. Unfortunately it's difficult to clean the yellow plastic.
What do you guys do to clean your yellow fluke equipment?
rgds
Tor
Hi,
From time to time my Fluke equipment is used in a dirty environment. Unfortunately it's difficult to clean the yellow plastic.
What do you guys do to clean your yellow fluke equipment?
rgds
Tor
Try Goo Gone
Regards,
Boris Mohar
Got Knock? - see: Viatrack Printed Circuit Designs (among other things)
Try a simple hand cleaner such as orange goop or anything with pumice. A simple pen/pencil eraser will remove scuffs and minor scratches without any fluids. Clean the plastic screen with the pencil eraser to remove scratches and finish with rouge (Honda's face shield buffing compound makes a good finisher. Clean deep scratches first with a sharp razor blade to bring the surrounding material down to the same level as the scratch. Take a standard plastic bag and cut out a cover for the screen. Wet it on one side with dishwater soap and apply it to the screen pressing all air out to make a good protective cover.
I use it and it works.
D.L
"D.Laure" skrev i melding news: snipped-for-privacy@damia.uk.clara.net...
Against oily and dirty hands when measuring different parameters on well used diesel generators too...?
Tor
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.