1 phase - use a starter?

Application is a 40s Craftsman belt-drive table saw upon which I have just recently completed a "rebuild" - complete dismantle, stripped, cleaned/derusted, new bearings and snap clips. Bought two and am using best parts from both. One had a Dayton 2HP 115/230V, 21/11.5amp, 3450 rpm, sealed motor with external fan, on an H56 frame. This is the one I intend to mount and use on the saw.

In other news . . . because I have and am teaching my 13 yo son (and some of his friends) in use of my woodworking tools, have set up a large hoffman control panel with pilots, AB key lock switches and estops in the line both on the control panel and on/near the machines themselves. All 120volt machines have had plugs changed to heavy duty twist lock plugs that go into nearby mounted matching outlets so that lock-switched control panel cannot be easily end run. Keys stay with me

- not foolproof if he is determined, but certainly enough to slow him down big time. The estops on/near the various machines are so I can kill the power while he is using it, should a problem arise. Or of course I can stand outta the way near the control panel and kill the power there should it be necessary.

TRUE QUESTION> In doing the research to purchase the correct switches (all AB) I bumped into the motor starter phenomenon and it's occaisional use on 1 phase motors to relieve startup and overload strain. Now my Dayton is almost certainly a capacitor start motor. Can one even employ the use of a motor starter for a capacitor start 1 phase motor? Now because I have both an estop and a gaurded footswitch on the saw, if I did employ a starter, it would almost need to be mounted on the side of the saw itself because a motor starter, correct me if I'm wrong, should have no power obstructions between itself and the motor. Is the whole idea of a starter in my application pure overkill and folly? Or could it make sense to protect the motor with cleaner power and easier starts, creating longevity of the Dayton? Heck maybe the capacitor controls that and the whole thing is ludicris. Somebody help me, please.

Thanx. TSL

Reply to
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.