This attachment allows a cable to pass through a panel, and clamp the cable into position.
I know I bought it from an ordinary outlet, but I cannot for the life of me remember what it's called.
Any ideas?
Sylvia.
This attachment allows a cable to pass through a panel, and clamp the cable into position.
I know I bought it from an ordinary outlet, but I cannot for the life of me remember what it's called.
Any ideas?
Sylvia.
"Strain relief" or "cable gland," maybe.
-- john, KE5FX
Gland.
Tim
-- Seven Transistor Labs, LLC Electrical Engineering Consultation and Design Website:
Wire Gland.
Of course it is. Yet somehow how I couldn't remember that all day. Must be getting old.
Thanks.
Sylvia.
My pet peeve is, you can't find glands for really small-diameter cables. We're forced to add a heat-shrink layer or two, and the whole thing with its nut, etc., ends up way too large.
-- Thanks, - Win
Sylvia Else wrote in news: snipped-for-privacy@mid.individual.net:
A strain relief. But the type you posted a pic of is a watertight variety.
So... an IP 67 or an IP 68 Strain relief / pass thru / gland.
Winfield Hill wrote in news:r8mcjh0oh8 @drn.newsguy.com:
Find and get and use "Pneumatic" tubing fittings. Way more expensive and usually made of brass, but plenty of plastic versions too.
But wait! Allied rules!
Yep, way too large.
-- Thanks, - Win
how small do you need?
-m100-m120/
Or bushing.
-- John Larkin Highland Technology, Inc Science teaches us to doubt. Claude Bernard
This one is smaller:
More smaller: Click on part number for drawings.
Which dimension do you consider to be too large? Hole size? Diameter? Thread?
-- Jeff Liebermann jeffl@cruzio.com 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558
Pick one from each column: cable gland cord feedthrough wire grip bundle retainer tubing strain relief power entry bushing As far as I can tell from random searching, most every combination is in use by at least one company or organization.
Also known as a "connector eliminator" by cost cutting and design review committees.
-- Jeff Liebermann jeffl@cruzio.com 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558
Winfield Hill wrote in news: snipped-for-privacy@drn.newsguy.com:
A quarter inch! ? Oh, yo are talking about the fitting itself being to big a profile on one or the other or both sides of the barrier.
Then you should simply use the capacitor EMI shielded pass thru parts!
Very expensive from that guy though!
Lasse Langwadt Christensen wrote in news: snipped-for-privacy@googlegroups.com:
the first one m6 is bigger than the one I posted at .256
Since Phil revealed that you're a naturist, the guys in this group are all over you.
Most people here have probably already seen a female body. Some will drool and leer anyhow. She's a better engineer than Phil, or probably than you.
Is your name really Corvod? Sounds Irish.
-- John Larkin Highland Technology, Inc Science teaches us to doubt. Claude Bernard
You can purchase them here:
Well then, you should have followed up Phil's post with that! He doesn't frighten you, does he?
Don't tell me, tell Phil.
Post something about electronics and we'll see.
-- John Larkin Highland Technology, Inc Science teaches us to doubt. Claude Bernard
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.