Help with wiring colors on old headphones

You have little idea about the variations between humans. To know this, you have to be one yourself.

Dave Plowman (Nutcase )

Only ONE ear unit is involved.

" As someone who does repairs for a living - I learnt LONG ago to expect the unexpected. Murphy RULES !!!!! "

... Phil

"Dave Plowman (Nutcase)"

As many others here, with far more insight than a jerk like you, have agreed.

..... Phil

Most people around the world agree you're a prat - so why suddenly believe them?

Hello Patrick.

Left ear: Yellow is + and Black is - Right ear: Red is + and Blue is -

Kindest regards.

--- Posted via news://freenews.netfront.net/ - Complaints to snipped-for-privacy@netfront.net

I wonder if they will last any longer than the originals. At 6.66 UKP periodic replacement could get expensive, and stockpiling them would be useless.

A Google search for 414 headphones pops bhphotovideo up to the top, where the earpads are $5.50, about half the UK price.

I tend to agree with a lot of technical things you reply with. But when you star suggesting people take a bullet to the head that crosses the border for even a Teflon skinned person like me.

That's my nick name you sheep-shagging nutjob, don't wear it out.

Oooooooooo the IRONY

Oooooooooo the IRONY

SPROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOING! Now you've done it, ruin a perfectly good irony meter.

Nobody. But I have sent your death threats to Individual.net. Let's see how they feel about you thinking you can threaten anyone you wish with no consequences.

Provide one believable and undeniable strand of evidence that you repair electronics for a living. Having a hyper-antisocial personality like yours would get you fired from any employer. And working for yourself, the same personality disorder would send prospective customers running for their lives never to return.

So unless you have some proof, I say you are a liar.

"Meat Plow"

Who will help ?

..... Phil

No one will lift a finger to help you, Phyllis.

Start with a piece of open-cell foam about 1/2" thick.

In a piece of 1/8" thick stiff material (I used Masonite), cut a round hole a bit smaller than the diameter of the headset drivers (this will allow the foam to stretch slightly when you install the pads, so it'll stay in place).

Put the masonite on the foam and press it down hard (use clamps). The foam will bulge up in the hole.

With a very sharp small-bladed utility knife, cut around the hole to free the foam so it stands up in a straight-sided cylinder. Be careful not to cut all the way through. Then slide the blade across the hole while using a sawing motion. This will cut off the middle part of the foam.

Now, you should have a piece of 1/2" thick foam with a circular part in the middle which is 1/8" thick. Trim the outside to a circular shape, a bit larger than the drivers.

Of course, you can use a different thickness of masonite to control the thickness of the foam where the sound comes through, if you like a "softer" fit on your ears.

Isaac

Now I understand your special problem. YMMD

Become unplugged. Best pull the usenet-plug. THX

Saludos Wolfgang

With headphones and a correctly-phased mono signal, the sound 'image' is indeed slap-bang in the middle of your head. However, I find that mono signals sound dead compared with stereo, and when listening for a long time, this centre-of-the-head sound can start to become very tiring.

I find that reversing the phase of one of the headphones produces a much wider audio image, and is generally much easier to listen to. I can only hope that the purists will forgive me.

"Ian Jackson"

Heaps of schems have been published to turn mono into a phoney stereo using phase shift across the audio band - so one of them is worth a try too.

BTW:

A voice speaking to you from inside your head is a tad alarming for anyone with schizoid tendencies.

.... Phil

On this topic did anyone else see the NHK broadcast a few months back about a digital version of binaural recording that alters the phase frequency response of the high end of close miked material to extend the stereo sound stage vertically. The trick works by tweaking the frequency phase relationship to match what the ear expects from a wave incident at a given angle. It just sounded odd on loudspeakers.

The demo was of church bells meant to sound high up but I didn't get to hear it on headphones so I wonder if anyone else did. My Japanese isn't that good so I might be slightly misrepresenting what was said. It was a gee-whiz science programme so the explanation wasn't very detailed.

Regards, Martin Brown

In message , Phil Allison writes

Yes, that's the easiest way to do it.

I suppose it's also the best test to do when checking that you actually have got the phasing correct. Just dab the common connection on and off. The difference will be very obvious, and instant.

"Ian Jackson" Phil Allison

.... Phil

Please remove your headphones immediately.