Latest threads in Electronic Componentsshow only best voted threads

Subject Author Posted Replies
 
Read Protected PIC
The whole point of write protecting them is that you can't recover the ROM contents. Well, you can always strip off the plastic and image the bits, but that's a whole lot more expensive than writing...
4
4
 
PLL chip source needed...
I would investigate which of the usual functions are still working: preamp(s), AM/FM tuner, display, amps. You may be right, but I fixed an receiver last year which didn't light up, had no display,...
1
1
 
moving your parts bins
guess deal ain't that the truth!!!!
3
3
 
On physical processes in showering arcs
I think that should be "monotonic" Still apposite, though :-)
1
1
 
Tunnel diode rectification
I think you're looking at the superimposed "conventional" characteristic, and implying reverse blocking. Tunnel diodes conduct in reverse more or less from zero. It isn't a very good idea to apply...
4
4
 
Testing lead-acid gel cells
Put a significant load on them and measure how the current changes over time. With a correctly chosen load, 10 - 30 seconds should be more than enough to get a good idea about their capacity. I...
6
6
 
RF circulator
No it is not a homework assegnement...Why?? ha scritto nel messaggio news:
12
12
 
Zif socket recommendations
what in another I've found that the ZIF in a breadboard is iffy. the pins on a ZIF aren;t that long. it's easy to rock the ZIF left and right. The ZIF takes up a lot of breadboard space and what you...
5
5
 
Low jitter oscillators - special frequencies
[from my message of a month ago - looking for non PLL oscialltors] Thanks for all the comments and suggestions to roll my own... I was looking for a half-size can because I wanted to change...
1
1
 
Accurately measure C of electrolytic capacitors ?
forget about the RC oscillator, build a simple series RC circuit and conect the input to a function generator producing 1hz output. Find a proper value of R so the capacitor will just have enough time...
1
1
 
LM-377N ???????
I located a guy who has these parts. He can be contacted at this email. He has very good prices without any minimums
1
1
 
Fujitsu FTP-040MCS501 Thermal Printer Data
I need specification of printer and any documents about operation and maintenance.
1
1
 
Looking for manuals, datasheets etc.
Hello I'm looking for information about the Fujitsu FTP-040MCS501 Thermal Printer Data I'm looking for manuals/datasheets, compilers, etc. Thanks Jafari
1
1
 
datasheet QV208-02 from alaris
datasheet QV208-02 from alaris
1
1
 
Looking for 6-32 Threaded Screws in the UK
< Hello, < First of all, apologies for the off-topic question but I thought some of you < may be able to help. I'm looking for "6-32" threaded screws, whatever that < means. I've checked Farnell and...
7
7