You'll have to page back-and-forth between the Probe view and the Schematic view, UNLESS you have dual monitors.
Waveforms are shown in Probe, NOT on the Schematic. But bias conditions can be seen on-schematic using the "V" and "I" buttons.
...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC\'s and Discrete Systems | manus |
| Phoenix, Arizona Voice:(480)460-2350 | |
| E-mail Address at Website Fax:(480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |
I love to cook with wine. Sometimes I even put it in the food.
Hi all, Can I run a simulation and view the schematic to see what's going on i.e., current flow, voltages, etc. in different parts of the circuit. Much the same way MicroCap allows you to view the schematic when running a simulation. Thanks for any help, Ken
Thanks for the help Jim. Ken
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.