If you want to get your double-sided PTH boards (either 1 to 5 prototypes or mass production), made with High Quality PCB material(European, NOT from far-east), silkscreen, solder resist etc. at LOW PRICES (all at Euro) then take a look at:
Regards
If you want to get your double-sided PTH boards (either 1 to 5 prototypes or mass production), made with High Quality PCB material(European, NOT from far-east), silkscreen, solder resist etc. at LOW PRICES (all at Euro) then take a look at:
Regards
The prices for a single 2 layers 1dm2 full prototype is only 20Euro without VAT for foreign countries? What is the VAT if it will apply (ie. with invoice inside EU)? thanks
sci.electronics.basics
prototypes or mass production), made with High Quality PCB material(European, NOT from far-east), silkscreen, solder resist etc. at LOW PRICES (all at Euro) then take a look at:
are
pay
charges
Hi. Well, VAT at Greece is 18% but for all orders outside Greece with Invoice and Valid VAT number, no VAT applies from our side. Minimum hole is 0.5mm and the minimum required pad for this is 0.9mm. Minimum space/distance required from track to track is 0.3mm. Also the minimum tracks width is 0.3mm. Our offices address is Alexandroupoleos 49 str, Athens 11527, GREECE. Our fabrication facilities are at northern Greece (Xanthi city). Regards Danai
are
pay
charges
Dear Paul Yes I understand that. Thank you
The service looks OK at first glance, though the design limitations are rather coarse (15 thou track/ space, 0.5mm holes). I'd be happier to have a physical address of this Greek concern.
If you have a VAT number, send him that, and he won't charge you VAT assuming he's VAT registered in Greece. You have to declare it and pay VAT in your own country, but you can claim it back. Otherwise he charges you VAT at Greek rates. It's bizzarre, but that's the rules.
Paul Burke
I've got to mention
Cheers, Anders
Hi Anders. What do you mean by the "2pcs PCB-A and fill with PCB-B" phrase? Does Olimex say that(meaning what?), as I've checked at
Anders F wrote:
Euro-board
silk
But
"2pcs PCB-A
Euro-board
silk
But
"2pcs PCB-A
Hello. Just to clarify some things... Well, all of our boards are made using EU made laminate, that is for sure better quality than the far east ones... and has all the EU certifications also!!! Also we do pricing PCBs only with dimension and not with how many holes it has, etc, that others do! anyone can order us to make a prototype PCB without the string dimensions of 10x10cm. Just price it will be calculated based on the rule Euroxdm2. So if the board is a total of ie. 2.2dm2 the cost will be our pricelist reference x 2.2! That simple... Regards Danai
that
on
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.