Electronics Repair

21790 Threads Posts
to

Sony GV-8 Portable TV/8mm VCR

I needed something for transferring 8mm videotapes to DVD, and I bought this non-working video walkman hoping to at lea...
4 comments posted 19yrs
posted by zappymanNOSPAM
4 comments posted 19yrs posted by zappymanNOSPAM

RCA PTK195 M#P56820

I have a new Black Bar Problem with this set in for repair. Black Bar in center of picture. In the past this has been a...
0 comments posted 19yrs
posted by radiotech
0 comments posted 19yrs posted by radiotech

Desoldering basics

Hi all, I have a small surface mount amplifer/filter chip on a packed PCB that I need to replace. In order to solder in...
10 comments posted 19yrs
posted by kevin.pavin
10 comments posted 19yrs posted by kevin.pavin

Repair R/C Car Reciever

Hello, I am totally new in this, but I am hoping someone here can give me some tips. I have a R/C car reciever (Kyosho...
15 comments posted 19yrs
posted by helee4
15 comments posted 19yrs posted by helee4

Pioneer XR-P470C Mini system CD section duff

Hi, I've recently bought a secondhand XR-P470C mini system which has a duff CD section and would like some advice as to...
1 comments posted 19yrs
posted by g3zrj.morsekey
1 comments posted 19yrs posted by g3zrj.morsekey

RCA projector tube leak

Good day all! I have a RCA P60152CK rear projection unit that appears to have a coolant leak in the green picture tube....
13 comments posted 19yrs
posted by rictus55
13 comments posted 19yrs posted by rictus55

New 27" Sharp directview cable recept issue

In our area, channels above the teens are considered "cable", as they would be in most places. The service is Family(sa...
1 comments posted 19yrs
posted by ckozicki
1 comments posted 19yrs posted by ckozicki

Velleman K4000 stereo valve amp

I've only checked over unpowered so far, this amp, as its a kit thing. One horror and 2 inappropriates found so far. Wa...
2 comments posted 19yrs
posted by diverse8
2 comments posted 19yrs posted by diverse8

Best way to clean Pots.

I'm assuming spraying down the shaft with a cleaner/ lub and work it is the best way to do this? Some pots have openings...
19 comments posted 19yrs
posted by trm54321
19 comments posted 19yrs posted by trm54321

Optoma ep753

Hi. I have one Optoma ep753 where the dlp disc is brokend. Is ther anybody out ther that know where i can buy a new one?...
1 comments posted 19yrs
posted by thenezzar
1 comments posted 19yrs posted by thenezzar

Converting low resistance pot to high resistance ?

Over the years I've often done the opposite by putting a resistor between wiper and low end and another from wiper to h...
11 comments posted 19yrs
posted by diverse8
11 comments posted 19yrs posted by diverse8

Ultra miniature pots anywhere in the UK?U

Or a good keyword for searh engines Well they seem smaller than the sub miniature classification, plain linear or logs,...
4 comments posted 19yrs
posted by diverse8
4 comments posted 19yrs posted by diverse8